Author Topic: wind on leader, trick with dacron  (Read 11753 times)

0 Members and 1 Guest are viewing this topic.

Offline bryant

  • Senior Member
  • **
  • Posts: 257
  • Cred: 44
  • Gender: Male
  • Location: Pennington
wind on leader, trick with dacron
« on: June 05, 2012, 05:33:38 PM »
What the guys do here is, they add a piece of dacron over the double line, so that when you join the double line to your leader, you have that added protection and it also help the two bite together..
 
Sounds confusing , , have a look...
 
pic 1 :
 
when starting your double line, thread a piece of 50ib dacron (+-15cm) onto the line, so that it is sliding on the loop once the double line has been made..

Offline bryant

  • Senior Member
  • **
  • Posts: 257
  • Cred: 44
  • Gender: Male
  • Location: Pennington
Re: wind on leader, trick with dacron
« Reply #1 on: June 05, 2012, 05:39:43 PM »
Pic2: Now you want to slide the dacron to the bottom of the double line, pulling line tight so that the arms are equal lenght, and the dacron will also be the same lenght ...Use a piece of nylon to pull tight against.... pic will explain

Offline bryant

  • Senior Member
  • **
  • Posts: 257
  • Cred: 44
  • Gender: Male
  • Location: Pennington
Re: wind on leader, trick with dacron
« Reply #2 on: June 05, 2012, 05:45:56 PM »
pic3 : Now you start whipping down with waxed thread ( start on nylon, work way down), leaving a loop at the bottom... 
 
End result will look like the pic, this is now the end of your double line that will join to wind-on

Offline bryant

  • Senior Member
  • **
  • Posts: 257
  • Cred: 44
  • Gender: Male
  • Location: Pennington
Re: wind on leader, trick with dacron
« Reply #3 on: June 05, 2012, 05:52:15 PM »
pic 4: final joining  of the wind-on......
 
I like this, we use it, and i know alot of charter captains in new zealand use this....
 
 

Offline REEFMAN

  • Ultimate Champ
  • ****
  • Posts: 9768
  • Cred: 769
  • Gender: Male
  • Location: Jozi
Re: wind on leader, trick with dacron
« Reply #4 on: June 05, 2012, 06:00:26 PM »
Interesting stuff Bryant! That piece of Dacron just has to improve the join to the Wind-on - Dacron on Dacron has to be better than Dacron on Nylon! Makes sense. Downside is that it seems like a bit of a mission to do though.  :dunno:

 :+ cred: :shre:

Offline Lenny

  • Ultimate Champ
  • ****
  • Posts: 2529
  • Cred: 124
  • Gender: Male
  • Catch and Release
  • Location: Struisbaai
Re: wind on leader, trick with dacron
« Reply #5 on: June 05, 2012, 06:31:57 PM »
I have also seen this in Exmouth in Australia , have tried it , not to hard to get right Reefman .


Nice post ! with pics and alles ..
Self catering , family accommodation available  in Struisbaai . Contact Leon 0780394225

Offline travelmember

  • Ultimate Champ
  • ****
  • Posts: 663
  • Cred: 49
  • Gender: Male
  • Location: Cape Town Western Cape
Re: wind on leader, trick with dacron
« Reply #6 on: June 05, 2012, 07:00:50 PM »
Hi,
Why bother whipping it? The idea is to give extra protection to the wind on, so that the nylon doesn't cut through. If this is so, then the only piece that is really needed is the 1cm or so that is actually in the loop to loop. Once that is seated it isn't going to move. Rather just glue the ends when it is on.
Or am I missing something?

Offline Lenny

  • Ultimate Champ
  • ****
  • Posts: 2529
  • Cred: 124
  • Gender: Male
  • Catch and Release
  • Location: Struisbaai
Re: wind on leader, trick with dacron
« Reply #7 on: June 05, 2012, 08:29:22 PM »
If you have plenty of time , i suppose , one can make use of this , or if you are sceptic about your knots .
What I would like to know , is what knot do you use when joining , mainline and Dacron loop together ?
I agree with more protection is always a good bet , because you never know when you might lock into a long battle..
but [size=78%] I think the jackpot Question here is , Does it make a diff? [/size]
Self catering , family accommodation available  in Struisbaai . Contact Leon 0780394225

Offline REEFMAN

  • Ultimate Champ
  • ****
  • Posts: 9768
  • Cred: 769
  • Gender: Male
  • Location: Jozi
Re: wind on leader, trick with dacron
« Reply #8 on: June 05, 2012, 08:43:48 PM »
If you have plenty of time , i suppose , one can make use of this , or if you are sceptic about your knots .
What I would like to know , is what knot do you use when joining , mainline and Dacron loop together ?
I agree with more protection is always a good bet , because you never know when you might lock into a long battle..
but [size=78%] I think the jackpot Question here is , Does it make a diff? [/size]

We use the Modified Catspaw Lenny.
Either of these 2 knots -
Std Catspaw:  http://www.ultimateangling.co.za/index.php?topic=9607.0
Mod Catspaw:   http://www.ultimateangling.co.za/index.php?topic=71.0

But both those knots need a big loop in the mainline end?

Not sure what the Offshore guys use though?

Offline Lenny

  • Ultimate Champ
  • ****
  • Posts: 2529
  • Cred: 124
  • Gender: Male
  • Catch and Release
  • Location: Struisbaai
Re: wind on leader, trick with dacron
« Reply #9 on: June 05, 2012, 08:46:46 PM »
If you have plenty of time , i suppose , one can make use of this , or if you are sceptic about your knots .
What I would like to know , is what knot do you use when joining , mainline and Dacron loop together ?
I agree with more protection is always a good bet , because you never know when you might lock into a long battle..
but [size=78%] I think the jackpot Question here is , Does it make a diff? [/size]

We use the Modified Catspaw Lenny.
Either of these 2 knots -
Mod Catspaw:  http://www.ultimateangling.co.za/index.php?topic=9607.0
Std Catspaw:   http://www.ultimateangling.co.za/index.php?topic=71.0

But both those knots need a big loop in the mainline end?

Not sure what the Offshore guys use though?
Yeah I know , I am using a mod Catspaw , I was just wondering what do they use ?
I could be wrong , but the guys up where I saw it , well basicly its a Albright , so its not a Loop to loop Connection ...
Self catering , family accommodation available  in Struisbaai . Contact Leon 0780394225

Offline Rory mundy

  • Ultimate Champ
  • ****
  • Posts: 1762
  • Cred: 66
  • Gender: Male
  • vidalbum
  • Location: St Lucia
Re: wind on leader, trick with dacron
« Reply #10 on: June 05, 2012, 08:52:07 PM »
im using catspaw for wind on then appropriate swivil onto lure leader

vidalbum

Offline bryant

  • Senior Member
  • **
  • Posts: 257
  • Cred: 44
  • Gender: Male
  • Location: Pennington
Re: wind on leader, trick with dacron
« Reply #11 on: June 05, 2012, 08:55:17 PM »
I only do this to the big sticks 50ib to 130ib...... use a normal catspaw, turned 3 times..
 
Takes extra 5 min to do thats all... we leave rods rigged for a trip so its not a mission at all....
 
Just extra security..

Offline Rory mundy

  • Ultimate Champ
  • ****
  • Posts: 1762
  • Cred: 66
  • Gender: Male
  • vidalbum
  • Location: St Lucia
Re: wind on leader, trick with dacron
« Reply #12 on: June 05, 2012, 08:58:24 PM »
what size loop are you leaving

vidalbum

Offline bryant

  • Senior Member
  • **
  • Posts: 257
  • Cred: 44
  • Gender: Male
  • Location: Pennington
Re: wind on leader, trick with dacron
« Reply #13 on: June 05, 2012, 09:10:47 PM »
Size loop ?  50c coin should be able able to fit through,,,maybe even a tiny bit smaller

Offline REEFMAN

  • Ultimate Champ
  • ****
  • Posts: 9768
  • Cred: 769
  • Gender: Male
  • Location: Jozi
Re: wind on leader, trick with dacron
« Reply #14 on: June 05, 2012, 09:13:12 PM »
Bryant how do you do a CatsPaw if you have 2 small loops. Our Wind-ons for R/S have a very small loop. We get the one big loop in the mainline Bimini loop.

Offline bryant

  • Senior Member
  • **
  • Posts: 257
  • Cred: 44
  • Gender: Male
  • Location: Pennington
Re: wind on leader, trick with dacron
« Reply #15 on: June 05, 2012, 09:35:09 PM »
Reefz-my wind ons for the boat, they fit, but its tight... maybe 50c to R2  coin,,,, its difficult to get the in out in out right, but once it sits its sits mooi... will do one tomorrow and put a pic up...
 
 

Offline Fishaholic

  • Ultimate member
  • ***
  • Posts: 259
  • Cred: 23
  • Location: Vanderbijlpark
Re: wind on leader, trick with dacron
« Reply #16 on: July 13, 2012, 01:07:48 PM »
Hi guys,
I made up windon's for my trolling setup. 0.8mm with 200lb JB hollow core spectra. Have 35lb mono on reel. Made a bimini on 35lb mono, connected to windon with standard catspaw, about 6 turns. The LB hollow spectra is very thin, and I thought it might cut into the mono. After I hooked a shark, and have put some pressure, the catspaw broke, both legs of mono parted. I then went back to the old my old way of bimini in 35LB and connect to 0.8 leader with albright. Never gave problems, but sometimes struggles to go through eyes with fish at boat.
 
When doing the catspaw the mono stay straight and the spectra turrns around it. Is this right? Tried to do it otherway around but doesn't work lekker. hollow spectra too thin. Looks like the one in pic. Mono cuts at circle.
 
Is there a better way to do this windon connection, maybe try the modified catspaw? Or I have to use normal 80lb dacron to make the windons instead of the JB hollow 200lb? Any help, please.

Offline Rory mundy

  • Ultimate Champ
  • ****
  • Posts: 1762
  • Cred: 66
  • Gender: Male
  • vidalbum
  • Location: St Lucia
Re: wind on leader, trick with dacron
« Reply #17 on: July 13, 2012, 01:10:42 PM »
check bryants first post the put dacron over the line in the loop for protection

vidalbum

Offline REEFMAN

  • Ultimate Champ
  • ****
  • Posts: 9768
  • Cred: 769
  • Gender: Male
  • Location: Jozi
Re: wind on leader, trick with dacron
« Reply #18 on: July 13, 2012, 01:15:28 PM »
Fishaholic check post # 8 on this thread, it has the links to the CatsPaw knots...

T-50

  • Guest
Re: wind on leader, trick with dacron
« Reply #19 on: July 13, 2012, 08:48:34 PM »
Very interesting. Will try it .  :+ cred:

 

SimplePortal 2.3.7 © 2008-2026, SimplePortal