Author Topic: HMG slim line /7 for coffe grinder  (Read 5838 times)

0 Members and 1 Guest are viewing this topic.

Offline Angler 1

  • Senior Member
  • **
  • Posts: 225
  • Cred: 2
  • Gender: Male
  • Location: cape town
HMG slim line /7 for coffe grinder
« on: June 07, 2011, 12:45:39 PM »
Hi gents , i was disturbed yesterday , when i realised , we in Cape Town or maybe just me , have lost t he plot when it comes to the future of angling with grinders , theses set ups that the Natalians brought to light , were not really for targeting big non eds , i thought id get a set up and in our throw bait comps , gor for the bigger fish cause id cast further , then realised after speaking to learned anglers , that this was not the case. the ultegras were not designed for heavy hard fighting fish , and the stroke 6 rods could not deliver bigger baits , so a good freind of mine sugested a slimline hmg stroke seven (super mandril) for a grinder set up , ---WHAT DO YOU GUYS THINK?  :tkx: oh BTW ! i have a  :shmno: sarogossa 18000f and its powerful enough to take a beating from a large shark !
IF YOU NOT LIVING LIFE ON THE EDGE YOU TAKING UP SPACE!!!!!

Offline WalkersKiller

  • Fish The Sea | Fish The Fly | Gareth Roocroft
  • Ultimate Champ
  • ****
  • Posts: 7417
  • Cred: 366
  • Gender: Male
  • Conservation First!
  • Location: Edenvale, Gauteng
Re: HMG slim line /7 for coffe grinder
« Reply #1 on: June 07, 2011, 12:52:11 PM »
Go for it that sounds like an awesome setup, non eds on grinders are the  :ult: experience you will never go back once you have landed a decent non ed on a  :cg:

Offline deezynking

  • Ultimate Chancer
  • Ultimate member
  • ***
  • Posts: 930
  • Cred: 15
  • Gender: Male
  • Feeesshhhhh
  • Location: durban kzn
Re: HMG slim line /7 for coffe grinder
« Reply #2 on: June 07, 2011, 01:43:28 PM »
good to see you around angler1. WK is ryt, go for it.
check up under the rods n reel talk sect... theres some interesting setups etc there. im saving up to get a good spinning rod and reel for this aswell :)
 
 :tite :tite :tite :tite :tite :tite :tite :tite :tite :tite

Offline WalkersKiller

  • Fish The Sea | Fish The Fly | Gareth Roocroft
  • Ultimate Champ
  • ****
  • Posts: 7417
  • Cred: 366
  • Gender: Male
  • Conservation First!
  • Location: Edenvale, Gauteng
Re: HMG slim line /7 for coffe grinder
« Reply #3 on: June 07, 2011, 01:47:27 PM »
Heres some of my non eds I have got on a grinder... A daiwa opus 6000 + cost about 400 bucks at the time... And an okuma grinder Raggie caught by Stephan...

Offline Angler 1

  • Senior Member
  • **
  • Posts: 225
  • Cred: 2
  • Gender: Male
  • Location: cape town
Re: HMG slim line /7 for coffe grinder
« Reply #4 on: June 07, 2011, 05:47:10 PM »
i have one set up so far but worried i might be losing some distance cause the rod is made for plugging and spinning but really strong , it was bult by shimano for big G T's ect, will let you guys know what unveils in the next week or two ,
IF YOU NOT LIVING LIFE ON THE EDGE YOU TAKING UP SPACE!!!!!

Offline aquadementia

  • Spineless
  • Member
  • *
  • Posts: 65
  • Cred: -9
  • Gender: Male
  • Location: Jeffreys Bay
Re: HMG slim line /7 for coffe grinder
« Reply #5 on: June 07, 2011, 06:46:43 PM »
Angler1 are you gonna go for a 400 or a 360? I think a 360 would be easier to cast with if you're gonna be throwing big baits specifically. But then again a 360/7hmg is gonna be pretty stiff? You looking at throwing proper baits like tail heads?

Offline Angler 1

  • Senior Member
  • **
  • Posts: 225
  • Cred: 2
  • Gender: Male
  • Location: cape town
Re: HMG slim line /7 for coffe grinder
« Reply #6 on: June 07, 2011, 08:10:39 PM »
hi there aqua , no that might be toobig , but large makie heads with fillets , mullet heads with choka but largish baits, i am gona try a stroke  7 slimline super mandril this week and ill let you guys know, if i get say 25 m more , than the shimano tirelago then it would be wise to get one , cause i have one deficit already , the reel is not made for throwing distance but more jigging, so instead of buying a new reel that would probably only last after a few tassles with the False bay fishies , id rather stay with the Sarogossa and get a longer rod! i still wanna throw a deent bait to get a pick up by a large fish , our comps have non sliding days aswell , and i need to capitalise on this, i really want to get a proper set up , i have a brand new shimano 30 A in the box , that has not sen the salt yet , and i might just send it back cause i might not need it , but before i make that decision , i got to be convinced that this is the best way foward for me !
IF YOU NOT LIVING LIFE ON THE EDGE YOU TAKING UP SPACE!!!!!

Offline Half-Pint

  • CHAMPION ANGLER 2014
  • Ultimate Champ
  • ****
  • Posts: 3712
  • Cred: 223
  • Gender: Male
  • Location: Boksburg
Re: HMG slim line /7 for coffe grinder
« Reply #7 on: June 07, 2011, 08:51:00 PM »
Angler1 pm Action Man I think he has landed some serious fish on an Ultegra. I don't think any grinders are really going to handle huge fish as well as a trini but for a couple of comps a year its probably ok

Offline aquadementia

  • Spineless
  • Member
  • *
  • Posts: 65
  • Cred: -9
  • Gender: Male
  • Location: Jeffreys Bay
Re: HMG slim line /7 for coffe grinder
« Reply #8 on: June 07, 2011, 11:23:20 PM »
hi there aqua , no that might be toobig , but large makie heads with fillets , mullet heads with choka but largish baits, i am gona try a stroke  7 slimline super mandril this week and ill let you guys know, if i get say 25 m more , than the shimano tirelago then it would be wise to get one , cause i have one deficit already , the reel is not made for throwing distance but more jigging, so instead of buying a new reel that would probably only last after a few tassles with the False bay fishies , id rather stay with the Sarogossa and get a longer rod! i still wanna throw a deent bait to get a pick up by a large fish , our comps have non sliding days aswell , and i need to capitalise on this, i really want to get a proper set up , i have a brand new shimano 30 A in the box , that has not sen the salt yet , and i might just send it back cause i might not need it , but before i make that decision , i got to be convinced that this is the best way foward for me !


cool, let us know how your test drive goes!

Offline steve m

  • Member
  • *
  • Posts: 241
  • Cred: 25
  • Location: cape town
Re: HMG slim line /7 for coffe grinder
« Reply #9 on: June 08, 2011, 12:26:24 PM »
Don hook a big bronzie on the braid and you going to strugle! there is almost no drag to help tire the fish thats why alot of the SC guys use 600m of braid and the rest 0.55 or 0.60 because they say it shortens the fight alot because it helps tire the fish BUT when there is kelp in the water you will be better off because unless it touches the roots its just going to slice through the kelp!
that said i would only use brais as mainline for edibles and small non eds but it could work really well?

Offline aquadementia

  • Spineless
  • Member
  • *
  • Posts: 65
  • Cred: -9
  • Gender: Male
  • Location: Jeffreys Bay
Re: HMG slim line /7 for coffe grinder
« Reply #10 on: June 08, 2011, 12:31:59 PM »
remember that a saragosa 18k has double the drag that a 30 sized reel would have, so I think if A1 digs himself a nice hole he can just tighten up and hold on!

Offline Angler 1

  • Senior Member
  • **
  • Posts: 225
  • Cred: 2
  • Gender: Male
  • Location: cape town
Re: HMG slim line /7 for coffe grinder
« Reply #11 on: June 08, 2011, 04:16:00 PM »
Angler 1 is 6ft and 130 kg ! i think ill handle myself with ease lol!, Stevie ma boy , remember u stood next to me and im app double your size lol! thanks for te concern , steve , guys have been catching monsters with braid , and id bet a GT of 50 kilos fights more than a bronzie of 100kg  most of these GTs have been caught on braid might i add, as Aqua said , this reel as a 44lb drag actually!
IF YOU NOT LIVING LIFE ON THE EDGE YOU TAKING UP SPACE!!!!!

Offline steve m

  • Member
  • *
  • Posts: 241
  • Cred: 25
  • Location: cape town
Re: HMG slim line /7 for coffe grinder
« Reply #12 on: June 08, 2011, 06:33:54 PM »
Angler 1 is 6ft and 130 kg ! i think ill handle myself with ease lol!, Stevie ma boy , remember u stood next to me and im app double your size lol! thanks for te concern , steve , guys have been catching monsters with braid , and id bet a GT of 50 kilos fights more than a bronzie of 100kg  most of these GTs have been caught on braid might i add, as Aqua said , this reel as a 44lb drag actually!
haha ya no you right haha

 

SimplePortal 2.3.7 © 2008-2026, SimplePortal