Author Topic: TOTALLY CONFUSED !!!!! with Braid.  (Read 1756 times)

0 Members and 1 Guest are viewing this topic.

Offline Hennie2809

  • Member
  • *
  • Posts: 36
  • Cred: 0
  • Gender: Male
  • Live today as if it is your last day.
  • Location: Centurion Pretoria
TOTALLY CONFUSED !!!!! with Braid.
« on: September 17, 2019, 02:20:24 PM »
 :dunno: :dunno: :dunno: :dunno:
After reading a million posts on braid I am still confused. I assume that everybody is unique and has his own opinion on braid.
I bought myself a Daiwa black gold 10" rod and a Daiwa BG 4000 grinder.
This will be my setup for scratching edibles on the West Coast, St Helena bay area.
The following is my IDEA of what it must look like.


Power Pro spectra super slick 8 fiber braid, 20Lb with 1.5 meter of 20Lb mono leader. Then I will use swivel tees and fluorocarbon for my hooks.


Any advice on this setup please.
You live every day, but you die only once.

Offline Kes

  • Senior Member
  • **
  • Posts: 282
  • Cred: 1
  • Gender: Male
  • Location: Sandown
Re: TOTALLY CONFUSED !!!!! with Braid.
« Reply #1 on: September 17, 2019, 03:33:37 PM »
:dunno: :dunno: :dunno: :dunno:
After reading a million posts on braid I am still confused. I assume that everybody is unique and has his own opinion on braid.
I bought myself a Daiwa black gold 10" rod and a Daiwa BG 4000 grinder.
This will be my setup for scratching edibles on the West Coast, St Helena bay area.
The following is my IDEA of what it must look like.


Power Pro spectra super slick 8 fiber braid, 20Lb with 1.5 meter of 20Lb mono leader. Then I will use swivel tees and fluorocarbon for my hooks.


Any advice on this setup please.

You should use a heavier braid leader first and then 1.5m or less of mono ( I would reduce this to 1m or leave it out completely given the length of you rod). Essentially the mono will sit outside the tip so you are actually casting with the braid leader. The length of the braid leader will be commensurate to the length of the rod but the easy way to work it out is three to four turns of braid leader on your reel and about 5-10cm outside the tip ( if you are using the mono leader). If you are not using the mono leader then three to four turn on your reel and an amount equivalent to half the rod length outside the tip.

The use of the mono leader has its pros and cons. The one con is that on a short 10-10.6ft rod, the knot on the 1.5m of mono leader will probably be sitting close to the 2nd or 3rd guide or even the 4th from the tip if you are using say a 50cm trace length because you want your drop to be no more than half the rod length. But if the knot sits outside the tip on a 1.5m leader the drop going to be way past half the length of the rod. This makes it hard to cast with this drop length.

Hope this makes sense..





 

Offline garrickhunter

  • Senior Member
  • **
  • Posts: 66
  • Cred: 0
  • Gender: Male
  • Location: VERULAM, kwazulunatal
Re: TOTALLY CONFUSED !!!!! with Braid.
« Reply #2 on: September 17, 2019, 10:17:10 PM »
If you fishing areas that dont have a lot of rocks just shorten the fluoro leader to allow for your trace.make it long enough so you can cast comfortably.no need for braid leader.Check out the guys on ASFN.They use the same rod reel combo and fish in the bricks for bronze bream using much lighter braid.

Offline Hennie2809

  • Member
  • *
  • Posts: 36
  • Cred: 0
  • Gender: Male
  • Live today as if it is your last day.
  • Location: Centurion Pretoria
Re: TOTALLY CONFUSED !!!!! with Braid.
« Reply #3 on: September 19, 2019, 09:16:49 AM »
THANK YOU GUYS, THANK YOU.
You live every day, but you die only once.

 

SimplePortal 2.3.7 © 2008-2026, SimplePortal