Author Topic: Exage conversion  (Read 4337 times)

0 Members and 1 Guest are viewing this topic.

Offline gavin erwin

  • Senior Member
  • **
  • Posts: 808
  • Cred: 76
  • Gender: Male
  • Location: 28 york rd South Kensington joburg
Exage conversion
« on: August 01, 2013, 04:10:31 PM »
I want to join the "Grinder Revolution" but I have not got a nice heavy grinder set up for sliding and putting big baits out. How easy would it be to convert an Exage AX Surf 14ft into a spinning rod. Would it be worth it? :cnfzd
Reach for a bream!

Offline Willie

  • Ultimate Champ
  • ****
  • Posts: 2033
  • Cred: 237
  • Gender: Male
  • Ultimate Novice
  • Location: Nelspruit Mpumalanga
Re: Exage conversion
« Reply #1 on: August 01, 2013, 04:36:52 PM »
I do not know if this will help you but I use a 14ft rod with a Tica Spinfocus 7000 for shore angling it is hopelessly to heavy to use for spinning. I use a 6 oz sinker and being not the best person for casting I get it out quite a distance and the reel is nice to handle some big ones. The complete set up cost me R1200-00. Do not ask me what type of rod it is I will have to look on the weekend, but is was the same cost as what I paid for my exage 1446.
The worst day fishing is better than the best day at office

Offline gavin erwin

  • Senior Member
  • **
  • Posts: 808
  • Cred: 76
  • Gender: Male
  • Location: 28 york rd South Kensington joburg
Re: Exage conversion
« Reply #2 on: August 01, 2013, 04:55:47 PM »
Fantastic info thanks Willie. :tkx:
Reach for a bream!

Offline Ray Hall

  • Retired
  • *
  • Posts: 0
  • Cred: 0
  • Gender: Male
Re: Exage conversion
« Reply #3 on: August 01, 2013, 05:11:20 PM »
I want to join the "Grinder Revolution" but I have not got a nice heavy grinder set up for sliding and putting big baits out. How easy would it be to convert an Exage AX Surf 14ft into a spinning rod. Would it be worth it? :cnfzd


which version of the rod is it? 1446 ? or 1468?


if its the 1446 you are in for treat!!!! you can convert that rod my man all 'n all. perfect action for pit grinder.




Offline gavin erwin

  • Senior Member
  • **
  • Posts: 808
  • Cred: 76
  • Gender: Male
  • Location: 28 york rd South Kensington joburg
Re: Exage conversion
« Reply #4 on: August 01, 2013, 05:24:19 PM »
Its a 1468 Ray. :cnfzd
Reach for a bream!

Offline Patches

  • Member
  • *
  • Posts: 50
  • Cred: 0
  • Gender: Male
  • Location: Stellenbosch
Re: Exage conversion
« Reply #5 on: August 01, 2013, 05:24:33 PM »
Had my an ultegra 14k on my 1446 for awhile! Works no problem!
Just threw the insert on the first guide out once with a wind knot.

Offline Patches

  • Member
  • *
  • Posts: 50
  • Cred: 0
  • Gender: Male
  • Location: Stellenbosch
Re: Exage conversion
« Reply #6 on: August 01, 2013, 05:25:10 PM »
Its a 1468 Ray. :cnfzd

Could work with the light tip?
 

Offline Ray Hall

  • Retired
  • *
  • Posts: 0
  • Cred: 0
  • Gender: Male
Re: Exage conversion
« Reply #7 on: August 01, 2013, 05:29:41 PM »
if its the older version of the exage (the one with the 3 tips, light, med, heavy) i would try the medium tip.


the light is just too 'floppy' .


none the less if its your only rod, and only choice, make it happen!!! when i started the grinder thing i tried on all rods and caught fish on all the incorrect rods. 


or if you have some spare cash see if you can get a secondhand purglass 400 / 2. in my opinion and that of a 12 year cap springbok angler the purglass /2 is the best for the 14 000 spool grinders.

Offline gavin erwin

  • Senior Member
  • **
  • Posts: 808
  • Cred: 76
  • Gender: Male
  • Location: 28 york rd South Kensington joburg
Re: Exage conversion
« Reply #8 on: August 01, 2013, 05:36:34 PM »



Thanks Ray that's some great info.

How much does this model go for, is it worth doing the conversion?



Reach for a bream!

Offline Ray Hall

  • Retired
  • *
  • Posts: 0
  • Cred: 0
  • Gender: Male
Re: Exage conversion
« Reply #9 on: August 01, 2013, 05:41:41 PM »



Thanks Ray that's some great info.

How much does this model go for, is it worth doing the conversion?


jong, if i were you i would stick to the multiplier ;-)


and rather get a smaller grinder setup , 10'6 or 11'2 or something similar and a 5500 pit grinder

Offline pieta

  • Ultimate member
  • ***
  • Posts: 673
  • Cred: 21
  • Gender: Male
  • Fishing for the fun of it
  • Location: Bethlehem
Re: Exage conversion
« Reply #10 on: August 01, 2013, 06:13:51 PM »
I agree with Ray. If younare curently fishing with a multiplier, stick with it. If you want to cast big baits multiplier is the answer. It is not easy at all to cast big baits with a grinder.

Offline gavin erwin

  • Senior Member
  • **
  • Posts: 808
  • Cred: 76
  • Gender: Male
  • Location: 28 york rd South Kensington joburg
Re: Exage conversion
« Reply #11 on: August 02, 2013, 07:23:54 AM »
Hahaha thats the thing, im really not good at casting a multiplier. :hehe: :hehe:
Reach for a bream!

Offline RobStar

  • Member
  • *
  • Posts: 3
  • Cred: 0
  • Gender: Male
  • Location: Cape Town, Western Cape
Re: Exage conversion
« Reply #12 on: August 02, 2013, 09:08:49 AM »
If the rod has multiple tips then it is actually rated for the heaviest tip.  The action with the heavy tip is the true action of the rod.

Offline pieta

  • Ultimate member
  • ***
  • Posts: 673
  • Cred: 21
  • Gender: Male
  • Fishing for the fun of it
  • Location: Bethlehem
Re: Exage conversion
« Reply #13 on: August 02, 2013, 04:14:48 PM »
Hahaha thats the thing, im really not good at casting a multiplier. :hehe: :hehe:
Belive me is wurth the time and eferd to get the multiplier under the belt. No grinder setup will ever out cast a multiplier when it comes to the bigger baits. Mutch less hasel with a multiplier.t

 

SimplePortal 2.3.7 © 2008-2026, SimplePortal