Author Topic: need some help and info  (Read 4726 times)

0 Members and 1 Guest are viewing this topic.

Offline Ray Hall

  • Retired
  • *
  • Posts: 0
  • Cred: 0
  • Gender: Male
need some help and info
« on: November 08, 2012, 12:11:33 PM »
what characteristics does a surf grinder rod need....


meaning what are one looking for in a rod for surf casting with a proper surf grinder like a ultegra 14 000 or similair big pit spool.


this is what I can think of:


BIG flip guide... bigger guides


14 foot plus blank


a soft rod? meaning not stiff at all... NON hmg


what am i missing?

Offline Ray Hall

  • Retired
  • *
  • Posts: 0
  • Cred: 0
  • Gender: Male
Re: need some help and info
« Reply #1 on: November 08, 2012, 12:13:09 PM »
i tried the following...


poseidon medium
Salitga light
waft light


the poseidon and waft is just too stiff. the waft is 13' and all of them have tiny eyes.


the saltiga is soft enough but just dont feel right to cast. Handles fish quite well but something just does not feel right.

Offline Marthin

  • Ultimate member
  • ***
  • Posts: 1257
  • Cred: 45
  • Gender: Male
  • Location: Cape Town South Africa
Re: need some help and info
« Reply #2 on: November 08, 2012, 12:23:17 PM »
Ray dit gaan altyd n compromise wees tussen wat jy wil trek en wat gemaklik vir jou gooi.

Ek het mos n stok by alpha pro gebreek, en Mangi het vir my die stok toe bietjie korter gemaak.  Sy lang grip is bietjie ongemaklik om te hengel maar hy gooi n helse hou gooi 4-5 ons, en die penn battle het nie eers n long cast setup soos die big pits nie.
Men... what lies ahead on that beach... IMMORTALITY.... TAKE IT IT"S YOURS!!!!!!

Offline Ray Hall

  • Retired
  • *
  • Posts: 0
  • Cred: 0
  • Gender: Male
Re: need some help and info
« Reply #3 on: November 08, 2012, 12:31:19 PM »
sien die ding is jy kan basies enige vis trek met so slap tipe stok (van die surf af bedoel ek). die ding met die grinder stokke jy kry nie dieslefde afstand met a stywe stok kry nie, dit werk net nie lekker saam nie.




Offline VISCHAL

  • Senior Member
  • **
  • Posts: 51
  • Cred: 0
  • Gender: Male
  • Location: Durban
Re: need some help and info
« Reply #4 on: November 08, 2012, 12:40:28 PM »
BIG flip guide... bigger guides


14 foot plus blank


a soft rod? meaning not stiff at all... NON hmg


what am i missing?
 
Bionic finger.
Bottom adjusment on reel seat
Idealy flex on top curve of rod.
 
 
All the best, also check Assassin.
 
 
 

Offline Ray Hall

  • Retired
  • *
  • Posts: 0
  • Cred: 0
  • Gender: Male
Re: need some help and info
« Reply #5 on: November 08, 2012, 12:42:39 PM »
BIG flip guide... bigger guides


14 foot plus blank


a soft rod? meaning not stiff at all... NON hmg


what am i missing?
 
Bionic finger.
Bottom adjusment on reel seat
Idealy flex on top curve of rod.
 
 
All the best, also check Assassin.


thanks buddy :)


ive got the finger :)


can you perhaps explain the flex on curve of rod? sorry im a dump afrikaans man :)

Offline Ray Hall

  • Retired
  • *
  • Posts: 0
  • Cred: 0
  • Gender: Male
Re: need some help and info
« Reply #6 on: November 08, 2012, 12:43:24 PM »
i have seen the assassin one, they are going for R1800 here in CPT. i think its a 14'6 rod lekker slap

Offline VISCHAL

  • Senior Member
  • **
  • Posts: 51
  • Cred: 0
  • Gender: Male
  • Location: Durban
Re: need some help and info
« Reply #7 on: November 08, 2012, 12:48:43 PM »
Hi.
 
The curve to the top helps with your cast, idealy you would want a rod that can cast as well as fight a decent fish when on. You get many types of blanks that have different functions, full curve, 50% curve, etc. Make sure you use the correct blank for your requirement and style of fishing.
 
 :cg:

Offline Ray Hall

  • Retired
  • *
  • Posts: 0
  • Cred: 0
  • Gender: Male
Re: need some help and info
« Reply #8 on: November 08, 2012, 12:52:51 PM »
Hi.
 
The curve to the top helps with your cast, idealy you would want a rod that can cast as well as fight a decent fish when on. You get many types of blanks that have different functions, full curve, 50% curve, etc. Make sure you use the correct blank for your requirement and style of fishing.
 
 :cg:


baie dankie!!


last question... I presumme the the bigger flip guide helps the control of the braid going of the spool correct? becuase i tried it on a rod with tiny flip guide and the braid kept it me when it comes of the spool.

Offline VISCHAL

  • Senior Member
  • **
  • Posts: 51
  • Cred: 0
  • Gender: Male
  • Location: Durban
Re: need some help and info
« Reply #9 on: November 08, 2012, 01:00:05 PM »
Correct.
 
Possibility of brade getting caught on the bottom guide if it is smaller, look at the design on the grinder, when unspooling the brade opens in a wider manner thus needing a bigger guide to control, aso check the direction of the guide. Depending on rod you buy, the single support shound be at the bottom for a grinder rod. This compared to a multiplier or baitcaster that so calls “peels off”.
Also remember to get a rod with brade friendly guiders especially the tip.
 

Offline Ray Hall

  • Retired
  • *
  • Posts: 0
  • Cred: 0
  • Gender: Male
Re: need some help and info
« Reply #10 on: November 08, 2012, 01:05:52 PM »
Correct.
 
Possibility of brade getting caught on the bottom guide if it is smaller, look at the design on the grinder, when unspooling the brade opens in a wider manner thus needing a bigger guide to control, aso check the direction of the guide. Depending on rod you buy, the single support shound be at the bottom for a grinder rod. This compared to a multiplier or baitcaster that so calls “peels off”.
Also remember to get a rod with brade friendly guiders especially the tip.


thanks buddy


really appreciate it!

Offline krissi

  • Ultimate member
  • ***
  • Posts: 789
  • Cred: 137
  • Gender: Female
  • Location: Underberg, KZN
Re: need some help and info
« Reply #11 on: November 08, 2012, 03:00:32 PM »
Hi Ray - I'm not an expert by any means, but if it helps the KZN guys use the Gremlins P6 (I use the P5 which is lighter) - not sure of the specs.  I love my rod and grinder set up and don't really fish with anything else now.

Offline Angler21

  • Ultimate member
  • ***
  • Posts: 571
  • Cred: 32
  • Location: Durban KZN
Re: need some help and info
« Reply #12 on: November 08, 2012, 03:39:01 PM »
Hi Ray

I am using the Assassin Beachmaster FSSC rod paired with the Daiwa Windcast Z5500.

Rod throws 6-7oz with bait beautifully

Check the Basil Manning site for more info

Good luck Ray!!

Offline Marthin

  • Ultimate member
  • ***
  • Posts: 1257
  • Cred: 45
  • Gender: Male
  • Location: Cape Town South Africa
Re: need some help and info
« Reply #13 on: November 09, 2012, 09:37:40 AM »
ray daai stok van my het die low riders op..... help verseker met die gooi afstand.
Men... what lies ahead on that beach... IMMORTALITY.... TAKE IT IT"S YOURS!!!!!!

Offline Ray Hall

  • Retired
  • *
  • Posts: 0
  • Cred: 0
  • Gender: Male
Re: need some help and info
« Reply #14 on: November 09, 2012, 12:15:57 PM »
awesome stuff guys, THANK YOU SO MUCH!!!! learnt alot here!

Offline wp34

  • Member
  • *
  • Posts: 98
  • Cred: 0
  • Gender: Male
  • Location: Gordons Bay
Re: need some help and info
« Reply #15 on: November 13, 2012, 08:04:41 PM »
My 5c: your first guide should be +- 1.2m from your reel to help with the casting distance.  I have a 11'6" Poseidon ultralight and the 1st guide is only a 30mm!

Offline pfr

  • Member
  • *
  • Posts: 29
  • Cred: 0
  • Gender: Male
  • Location: Eastern Freestate
Re: need some help and info
« Reply #16 on: November 13, 2012, 09:00:58 PM »
Ray ek kry die week 'n assasin beachmaster en ultegra en sal jou laat weet hoe die combo werk
 

 

SimplePortal 2.3.7 © 2008-2026, SimplePortal