Author Topic: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion  (Read 50037 times)

0 Members and 1 Guest are viewing this topic.

Offline fishatic

  • Ultimate member
  • ***
  • Posts: 500
  • Cred: 14
  • Gender: Male
  • Location: Randpark Ridge, Johannesburg
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #140 on: April 02, 2018, 07:02:42 AM »
There a are a couple of ways to finish it:

Sand down the blank, with  400 grit wet and dry paper. Use lots of water with a couple of drops of dish-washing liquid in it as a lubricant.

Scratch proof finish:
Sand down to 1000 grit with LOTS of water and dish-washing liquid as a lubricant.
Done. That's it. Doesn't scratch, peel or lift. Ever.

U40 Permagloss (its a pre-catalized one-part urethane, stinks like hell but final result is good)
You will need a power wrapper to get this right
Here's a YT video:
https://youtu.be/Sg1oZHn41aw

Rattle can spray.
This is actually pretty easy.
I like Heritage brand in clear gloss as it is suitable for outdoor use and the final finish can be very good if you put in a bit of extra effort:
Many light coats, don't try it get it done in 1 or 2. 5-8 light coats with 15 minutes between coats.
Let it dry for AT LEAST 24 hours.
Knock back the finish with 1200 grit wet and dry paper, lots of water and some dish-washing liquid.
Then the trick: Polishing Cream.
I like the L100 from Luxor (hardware stores often carry it or can get it for you)
Use a damp cloth and polish and polish and polish.
With effort you will get an absolutely flat finish with no orange peel effect.

Offline sardinella

  • Ultimate member
  • ***
  • Posts: 735
  • Cred: 24
  • Gender: Male
  • I like to spinfish
  • Location: St Lucia, KZN
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #141 on: April 02, 2018, 06:03:35 PM »
 (clap)
Thank you for some great advice. Your effort in this reply is appreciated.
I have just moved house this weekend, so will start shortly once settled.
Thanks again, and have some cred

Offline REEFMAN

  • Ultimate Champ
  • ****
  • Posts: 9766
  • Cred: 768
  • Gender: Male
  • Location: Jozi
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #142 on: April 03, 2018, 08:50:45 AM »
Great info from Brandon there! Not too many professional Rodbuilders who would share their trade secrets like that.  :+ cred: :resp:

Offline FishStyx

  • Ultimate Champ
  • ****
  • Posts: 3007
  • Cred: 51
  • Gender: Male
  • I fish, therefore I am.
  • Location: Louist Trichardt, Limpopo
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #143 on: April 03, 2018, 09:08:10 AM »
Great info from Brandon there! Not too many professional Rodbuilders who would share their trade secrets like that.  :+ cred: :resp:


 :corrct: A master and a gentleman.
Forgive me Father for I have spinned... It's been three weeks since my last cob session.

Offline sardinella

  • Ultimate member
  • ***
  • Posts: 735
  • Cred: 24
  • Gender: Male
  • I like to spinfish
  • Location: St Lucia, KZN
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #144 on: April 29, 2018, 03:03:15 PM »
Thanks again Brandon, I am getting a great finish following your advice to sand down  and polish.
Still waiting for my guides. Ordered some Fuji guides with fazlite rings.
« Last Edit: May 02, 2018, 07:05:33 AM by sardinella »

Offline REEFMAN

  • Ultimate Champ
  • ****
  • Posts: 9766
  • Cred: 768
  • Gender: Male
  • Location: Jozi
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #145 on: April 30, 2018, 09:02:53 AM »
Looking good Willie! Talented boy!

Offline fishatic

  • Ultimate member
  • ***
  • Posts: 500
  • Cred: 14
  • Gender: Male
  • Location: Randpark Ridge, Johannesburg
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #146 on: April 30, 2018, 11:06:45 AM »
Ordered some Fuji guides with fazlite rings.

Fazlite are really good value.
Just built myself two rods using them; a 3m Shore Slow jigging stick and a 2.9m plugging stick.
Very happy with performance

Offline DownUnder

  • Senior Member
  • **
  • Posts: 71
  • Cred: 4
  • Gender: Male
  • Location: Melbourne
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #147 on: May 01, 2018, 11:35:41 AM »
I’m looking at buying a 9ft Amia here in Australia, does anyone know if the latest rods have upgraded guides from earlier models?
Men go fishing all their lives.. not realizing it is not fish they are after

Offline fishatic

  • Ultimate member
  • ***
  • Posts: 500
  • Cred: 14
  • Gender: Male
  • Location: Randpark Ridge, Johannesburg
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #148 on: May 02, 2018, 07:00:40 AM »
Y frame Fujis with Aluminium Oxide centres.

Offline Plugger

  • Ultimate member
  • ***
  • Posts: 977
  • Cred: 13
  • Gender: Male
  • Location: Forest Hills, Durban
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #149 on: May 21, 2018, 09:36:14 AM »
So now my question is, do I buy the Amia Zero with Fuji guides or up grade my Amia (microwave eyes).Will the zero give me more distance and will it cast lighter lures ?
Education is important but fishing is importanter !

Offline Plugger

  • Ultimate member
  • ***
  • Posts: 977
  • Cred: 13
  • Gender: Male
  • Location: Forest Hills, Durban
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #150 on: May 21, 2018, 09:51:20 AM »
I'm getting good distance now but yesterday I was throwing at a shoal of Garfish and while I could reach them I wanted to get past them. The picture shows the bend in the Amia on casting . The Magic Missile spoon can be seen just to my left just above the horizon. It took me a while to see the direction the rod was bending. My boys call me "ol sidewinder"and stand well clear when I'm casting.
« Last Edit: May 21, 2018, 09:52:39 AM by Plugger »
Education is important but fishing is importanter !

Offline MIKE PIKE

  • Ultimate Hero
  • *****
  • Posts: 3886
  • Cred: 196
  • Gender: Male
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #151 on: May 21, 2018, 12:52:43 PM »
Nice loading on the rod , i would just upgrade the eyes on the Amia ... did it to mine makes a difference .. :Like:

Offline fishatic

  • Ultimate member
  • ***
  • Posts: 500
  • Cred: 14
  • Gender: Male
  • Location: Randpark Ridge, Johannesburg
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #152 on: May 21, 2018, 02:17:22 PM »
Sidewinder,

Nothing wrong with coming around the side - you are increasing the arc through which the rod moves.

However:

Your arms are collapsing against your body and you are pushing more than pulling down with the left.
Get that left hand UP above eye level, straighter right arm; almost like you are giving the rod to someone standing in front of you.
When your left hand can go no further, pull down hard bringing the rod butt around your body
You will cast further with less effort

Offline Plugger

  • Ultimate member
  • ***
  • Posts: 977
  • Cred: 13
  • Gender: Male
  • Location: Forest Hills, Durban
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #153 on: May 21, 2018, 02:52:14 PM »
Thanks guys I'll try that. Do you think the Fuji upgrade will give me more distance ? I tried to send a short video but the file is too big and I have no idea on how to reduce it.
Education is important but fishing is importanter !

Offline Kes

  • Senior Member
  • **
  • Posts: 282
  • Cred: 1
  • Gender: Male
  • Location: Sandown
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #154 on: May 21, 2018, 03:25:21 PM »
Thanks guys I'll try that. Do you think the Fuji upgrade will give me more distance ? I tried to send a short video but the file is too big and I have no idea on how to reduce it.


IF you do the KR concept upgrade, it should increase your distances. My Amia is done at last with the same guides. Will post pics and results soon enough.




Offline Half-Pint

  • CHAMPION ANGLER 2014
  • Ultimate Champ
  • ****
  • Posts: 3712
  • Cred: 223
  • Gender: Male
  • Location: Boksburg
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #155 on: May 21, 2018, 03:56:17 PM »
Proper guides and specifically proper guide placement will transform your rod. It is actually hard to believe just what an impact they make.

In my opinion a R500 rod re-done with correct guides and guide placement will outperform a R5000.00 rod with poor guides and placement by a significant amount.

Do the upgrade, you will absolutely not be sorry!

Offline Plugger

  • Ultimate member
  • ***
  • Posts: 977
  • Cred: 13
  • Gender: Male
  • Location: Forest Hills, Durban
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #156 on: June 17, 2018, 06:23:55 PM »
Well my boys have decided to pay for the upgrade for fathers day. Pleasecould you pm me the costs and shipping address etc. Is there the option of stainless or black eyes. How long do you need the rod for ? Im stuck in the "Hillcrest  Hilton"for probably another week.
Education is important but fishing is importanter !

Offline Plugger

  • Ultimate member
  • ***
  • Posts: 977
  • Cred: 13
  • Gender: Male
  • Location: Forest Hills, Durban
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #157 on: June 17, 2018, 06:57:47 PM »
Sorry its an 11ft amia heavy with microwave eyes
Education is important but fishing is importanter !

Offline fishatic

  • Ultimate member
  • ***
  • Posts: 500
  • Cred: 14
  • Gender: Male
  • Location: Randpark Ridge, Johannesburg
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #158 on: June 18, 2018, 06:20:00 AM »
You should get an email.....

Offline Plugger

  • Ultimate member
  • ***
  • Posts: 977
  • Cred: 13
  • Gender: Male
  • Location: Forest Hills, Durban
Re: Spinning Rod: Assassin Amia Fuji's KR-Concept Conversion
« Reply #159 on: June 18, 2018, 09:58:29 AM »
Thanks Fishatec. In hospital at the moment and dont have access to my email from my phone (oldschool).doc said looks loke home tomorrow and I'll contact you from there.
Education is important but fishing is importanter !

 

SimplePortal 2.3.7 © 2008-2026, SimplePortal