ooking for aluminium pipe

[Rory mundy]

chaps im urgently looking for a piece of 76mm aluminium pipe, only need a piece 500mm long the problem is that it must have a wall thickness of at least 6mm. If any one knows were a can get a piece would be great.
thanks rory

[Homie]

Pm mussel cracker, he might be able to assist.

[sea sick]

           aLUMINIUM TRADING COMPANY (PTY) LTD.                        
            Reg No. 1996/000271/07               
   122-128 TERRACE RD, SEBENZA, EDENVALE.                        
   POSTNET SUITE # 54,PRIVATE BAG X1, EDENGLEN 1613                        
   TEL & FAX 011 457 7200                        
but they dont have that size
   76.20 mm   6082T6   12.369   1.000   0.239
in a solid

and the round pipe is:

   63.50 X 2.50                      58.50   6063T6   1.298   6.000   0.291            
   76.10 x 1.27                      74.00   6063T6   0.810   6.000   0.355            
   76.20 X 3.18                      69.84   6061T6   1.976   6.000   0.349            
   88.90 X 4.78                      79.34   6061T6   3.420   6.000   0.403            
so your still stuck.

everything about aluminium, has everything, but it seems, that your spes specified is not manufactured.

ss

[Rory mundy]

does not have to be exactly 76mm just need the wall thickness have found one placee but need to order 10lenghts of 6meter

[Fritz]

You can make pention pipes from cheaper material then that. 
 
Jokes aside, you can try Non-Ferrous Metal their number is 031 480 7389.

[PH]

You can make pention pipes from cheaper material then that. 
 
Jokes aside, you can try Non-Ferrous Metal their number is 031 480 7389.

Even better if you can visit them. They will cut to size from off-cuts if they have that pipe available in their off-cuts.

[Rory mundy]

busy making a push pole for my boat. Easier to push my boat through the shore dump at st lucia facing foward. plus we can all get on the boat then get pushed in and stay dry.
the pipe is need as will act as a swivel in the bracket that im putting on the transom

[Rory mundy]

back of f200

[Rory mundy]

my push pole is under construction, launching with dry nads now thats will be something new now to get a decent tractor driver

[icstuff]

my push pole is under construction, launching with dry nads now thats will be something new now to get a decent tractor driver

Will galvanised steel do?

[Rory mundy]

it will work just heavy that's why im using aluminium

[sea sick]

if i recall correctly you wanted 500mm.
thats a short piece of push rod.
get something longer............................................

if you leave the push rod on the beech, you may find that it did get feet after returning.
ss

[Rory mundy]

the push pole is 6m the T piece at the end is 500mm

[sea sick]

ag jy sien..............
noiu kom die blond in my navore..............

when are we going down again?
hierdie ontrekking simptome nie lekker nie.

what does uncle Piet say?

just say when?, lets go..............

ss

[Rory mundy]

next month i think just need the launch at st lucia or vidal to come right