Author Topic: Pentigon T-Flex Grinder (Read 17448 times)

Fritz · « **on:** June 21, 2011, 07:14:54 AM »

Had a chat with Rob from Gremlins and they have just launched their new Grinder rods.

At this moment they have two rods made for the grinders. Both rods are T-Flex rods and come in a three piece.

Grinder 2

Three piece rod mainly for edible fishing and the lighter non-eds. The rod has a length of 4,2m and when testing them out we managed a constant 150m+ with a 5oz sinker. The rod is going to come in at a price of R2399-00.

Grinder 3

Also a three piece rod but mainly bult for non-ed fishing. Length of 4,2m. And when testing the rods out we managed a distance of 178m with a 6oz sinker. Price on the rod will be R2479-00.

The guys do have other options for the grinders in 1 piece rods but if you are looking for something to fold down and easy to transport this will be your way to go.

Half-Pint · « **Reply #1 on:** June 21, 2011, 07:32:40 AM »

Argh Fritz I had finally ridded myself of this grinder obsession! Now why did you have to go and post this

Lichia amia · « **Reply #2 on:** June 21, 2011, 07:51:56 AM »

:shre: Fritz

Gonna have to give Mr. Gavin a call for option 2 .

Fritz · « **Reply #3 on:** June 21, 2011, 07:54:55 AM »

I have not taken my other rods out of their bags since I got my grinder. I only fish with the 400/6 and grinder. My multipliers only see the water when I am sliding in the Transkei and every other guy I know that has gone this way is doing the same.

REEFMAN · « **Reply #4 on:** June 21, 2011, 09:26:04 AM »

Eish... so much pretty tackle needed... so little time... so little $$....

Homie · « **Reply #5 on:** June 21, 2011, 09:27:05 AM »

Quote from: REEFMAN on June 21, 2011, 09:26:04 AM

Eish... so much pretty tackle needed... so little time... so little $$....

Ditto x 10 !

deezynking · « **Reply #6 on:** June 21, 2011, 09:49:53 AM »

shot fritz :shre:

Half-Pint · « **Reply #7 on:** June 21, 2011, 09:51:57 AM »

Why do you guys think I drink coke! More $$$ for fishing

icstuff · « **Reply #8 on:** June 21, 2011, 10:00:31 AM »

Quote from: Must-Byte on June 21, 2011, 09:51:57 AM

Why do you guys think I drink coke! More $$$ for fishing

I am so desperate that I will only drink water

Half-Pint · « **Reply #9 on:** June 21, 2011, 10:18:08 AM »

Ya ya but your funny waters out there are worse than Stroh Rum!

Angler 1 · « **Reply #10 on:** June 21, 2011, 01:29:48 PM »

i just ordered my one piece !

CLS · « **Reply #11 on:** June 21, 2011, 01:47:19 PM »

Quote from: Fritz on June 21, 2011, 07:14:54 AM

Had a chat with Rob from Gremlins and they have just launched their new Grinder rods.

At this moment they have two rods made for the grinders. Both rods are T-Flex rods and come in a three piece.

Grinder 2

Three piece rod mainly for edible fishing and the lighter non-eds. The rod has a length of 4,2m and when testing them out we managed a constant 150m+ with a 5oz sinker. The rod is going to come in at a price of R2399-00.

Grinder 3

Also a three piece rod but mainly bult for non-ed fishing. Length of 4,2m. And when testing the rods out we managed a distance of 178m with a 6oz sinker. Price on the rod will be R2479-00.

The guys do have other options for the grinders in 1 piece rods but if you are looking for something to fold down and easy to transport this will be your way to go.

I will have to watch out when fishing for snoek off the backline, may get caught by a R&S angler.

Lichia amia · « **Reply #12 on:** June 21, 2011, 02:13:14 PM »

Quote from: Fritz on June 21, 2011, 07:14:54 AM

Grinder 3

Also a three piece rod but mainly bult for non-ed fishing. Length of 4,2m. And when testing the rods out we managed a distance of 178m with a 6oz sinker. Price on the rod will be R2479-00.

Will you still be able to use this rod with a

for sliding ?

Angler 1 · « **Reply #13 on:** June 21, 2011, 02:25:08 PM »

you probably gona get the bionic finger in the way , the eyes will be reversed and on the opposite side of the blank so the flex will be oppsite to that required for a multiplyer , can be used but not recomended~!

Homie · « **Reply #14 on:** June 21, 2011, 02:30:35 PM »

Quote from: Angler 1 on June 21, 2011, 02:25:08 PM

you probably gona get the bionic finger in the way , the eyes will be reversed and on the opposite side of the blank so the flex will be oppsite to that required for a multiplyer , can be used but not recomended~!

For sure.

Also remember, a Grinder sits much higher up the blank

Half-Pint · « **Reply #15 on:** June 21, 2011, 02:38:51 PM »

Homie with these new rods the guys are fishing with the reel mounted low like a mp you cast with your left hand on the bionic finger. Basically what I started doing when I bought your elbe and everyone chirped I was a chop! The problem with mounting the reel higher as I understand is it become very hard to crank with it at like chest height therefore you end up with the rod butt under one arm leading to some unique bruising

Homie · « **Reply #16 on:** June 21, 2011, 02:41:36 PM »

Hmmmm, sounds good !

Thanks Brad !

Fritz, are these the long butt or not ?

Fritz · « **Reply #17 on:** June 21, 2011, 02:55:31 PM »

They have short butts just like the MP.

Sylvester · « **Reply #18 on:** June 21, 2011, 03:03:49 PM »

Can somebody give me a good reason why a grinder would be better than a multiplier for medium weight angling?

Half-Pint · « **Reply #19 on:** June 21, 2011, 03:06:09 PM »

Bling bling!
Jokes aside for me it is the ease of throwing a grinder plus the added distance and sensitivity of braid.