Author Topic: Daiwa Exceller 4000E  (Read 1984 times)

0 Members and 1 Guest are viewing this topic.

Offline Angler21

  • Ultimate member
  • ***
  • Posts: 571
  • Cred: 32
  • Location: Durban KZN
Daiwa Exceller 4000E
« on: September 04, 2019, 07:32:40 AM »
Hello fellow anglers


I require some assistance with my reel, Daiwa Exceller 4000E. For some strange and unbeknown reason to me, I don't hear the drag sounding/clicking when I pull line off the spool under tightened drag.

Can someone please advise?

Thanks

Offline REEFMAN

  • Ultimate Champ
  • ****
  • Posts: 9768
  • Cred: 769
  • Gender: Male
  • Location: Jozi
Re: Daiwa Exceller 4000E
« Reply #1 on: September 04, 2019, 07:46:55 AM »
Under the spool on the shaft is the Drag Click spring. Looks like this...




The click spring makes contact with a ribbed ridge inside the spool. (Talking from memory here, will need to have a look at my Exceler tonight).

Either your click spring is broken, bent, not making contact with the ridge, or the ridge is worn flat?


Offline Angler21

  • Ultimate member
  • ***
  • Posts: 571
  • Cred: 32
  • Location: Durban KZN
Re: Daiwa Exceller 4000E
« Reply #2 on: September 04, 2019, 08:47:45 AM »
Thanks Reefs

Will take a look later.

 :udman:

Offline REEFMAN

  • Ultimate Champ
  • ****
  • Posts: 9768
  • Cred: 769
  • Gender: Male
  • Location: Jozi
Re: Daiwa Exceller 4000E
« Reply #3 on: September 04, 2019, 10:59:16 AM »
So checked my Exceler. Yes there is a ribbed section inside the spool, look underneath. The click spring catches this ridge when the spool turns. Don't think that ridge can really wear, so I'm pretty sure your spring needs to be bent a little to contact the ridge more firmly again.

 

SimplePortal 2.3.7 © 2008-2026, SimplePortal