ULTIMATE ANGLING - the Ultimate SA Fishing website

OFFSHORE ANGLING => General Offshore Angling Discussion => Topic started by: Rory mundy on July 15, 2011, 05:58:57 PM

Title: ooking for aluminium pipe
Post by: Rory mundy on July 15, 2011, 05:58:57 PM: chaps im urgently looking for a piece of 76mm aluminium pipe, only need a piece 500mm long the problem is that it must have a wall thickness of at least 6mm. If any one knows were a can get a piece would be great.
thanks rory
Title: Re: ooking for aluminium pipe
Post by: Homie on July 15, 2011, 06:24:17 PM: Pm mussel cracker, he might be able to assist.
Title: Re: ooking for aluminium pipe
Post by: sea sick on July 15, 2011, 06:36:26 PM:      aLUMINIUM TRADING COMPANY (PTY) LTD.
            Reg No. 1996/000271/07
   122-128 TERRACE RD, SEBENZA, EDENVALE.
   POSTNET SUITE # 54,PRIVATE BAG X1, EDENGLEN 1613
   TEL & FAX 011 457 7200
but they dont have that size
   76.20 mm   6082T6   12.369   1.000   0.239
in a solid

and the round pipe is:

   63.50 X 2.50 58.50   6063T6   1.298   6.000   0.291
   76.10 x 1.27 74.00   6063T6   0.810   6.000   0.355
   76.20 X 3.18 69.84   6061T6   1.976   6.000   0.349
   88.90 X 4.78 79.34   6061T6   3.420   6.000   0.403
so your still stuck.

everything about aluminium, has everything, but it seems, that your spes specified is not manufactured.

ss
Title: Re: ooking for aluminium pipe
Post by: Rory mundy on July 15, 2011, 08:51:39 PM: does not have to be exactly 76mm just need the wall thickness have found one placee but need to order 10lenghts of 6meter
Title: Re: ooking for aluminium pipe
Post by: Fritz on July 16, 2011, 06:24:36 AM: You can make pention pipes from cheaper material then that. :lolo:

Jokes aside, you can try Non-Ferrous Metal their number is 031 480 7389.
Title: Re: ooking for aluminium pipe
Post by: PH on July 16, 2011, 06:50:30 AM: Quote from: Fritz on July 16, 2011, 06:24:36 AM
You can make pention pipes from cheaper material then that. :lolo:

Jokes aside, you can try Non-Ferrous Metal their number is 031 480 7389.
Even better if you can visit them. They will cut to size from off-cuts if they have that pipe available in their off-cuts.
Title: Re: ooking for aluminium pipe
Post by: Rory mundy on July 16, 2011, 09:49:55 AM: busy making a push pole for my boat. Easier to push my boat through the shore dump at st lucia facing foward. plus we can all get on the boat then get pushed in and stay dry.
the pipe is need as will act as a swivel in the bracket that im putting on the transom
Title: Re: ooking for aluminium pipe
Post by: Rory mundy on July 18, 2011, 08:34:16 PM: back of f200
Title: Re: ooking for aluminium pipe
Post by: Rory mundy on July 20, 2011, 07:14:21 PM: my push pole is under construction, launching with dry nads now thats will be something new now to get a decent tractor driver
Title: Re: ooking for aluminium pipe
Post by: icstuff on July 21, 2011, 09:24:31 AM: Quote from: Rory mundy on July 20, 2011, 07:14:21 PM
my push pole is under construction, launching with dry nads now thats will be something new now to get a decent tractor driver

Will galvanised steel do?
Title: Re: ooking for aluminium pipe
Post by: Rory mundy on July 21, 2011, 01:38:33 PM: it will work just heavy that's why im using aluminium
Title: Re: ooking for aluminium pipe
Post by: sea sick on July 21, 2011, 06:18:55 PM: if i recall correctly you wanted 500mm.
thats a short piece of push rod.
get something longer............................................

if you leave the push rod on the beech, you may find that it did get feet after returning.
ss
Title: Re: ooking for aluminium pipe
Post by: Rory mundy on July 21, 2011, 06:28:00 PM: the push pole is 6m the T piece at the end is 500mm
Title: Re: ooking for aluminium pipe
Post by: sea sick on July 21, 2011, 06:48:51 PM: ag jy sien..............
noiu kom die blond in my navore..............

when are we going down again?
hierdie ontrekking simptome nie lekker nie.

what does uncle Piet say?

just say when?, lets go..............

ss
Title: Re: ooking for aluminium pipe
Post by: Rory mundy on July 21, 2011, 06:52:40 PM: next month i think just need the launch at st lucia or vidal to come right