ULTIMATE ANGLING - the Ultimate SA Fishing website
General Angling Topics => Shore Angling => Topic started by: Rods on February 25, 2011, 06:23:10 PM
-
Howzit guys. Just wanted to know what would the ideal live bait trace be for GT's?
-
:cnfzd .. good question Rods, also been wondering whats the ideal live bait trace for GT's , i was thinking along the lines of a standard non-return clip or live bait clip and double hook set up and made up with 1 mm leader as he's going to run for the reefs and rocks to cut u off.. :dunno:
-
So whats the final answer guys?Im very keen to know. :gt: :resp:
-
bit stumped on this one , i think using steel could also be done but not to heavy , im sure someones going to come up with a trace soon , the distance between the hooks is also a grey area for me , suppoze it depends on the live bait size u sliding out , not sure if a swim bait rig would also work , but im sure it will if made up properly using thick mono as well for the hook trace for added protection.
-
:uarocksI suppose it also depends on the area you fishing.I have so much :resp:for this fish.Ive been busted so many times by this beauty,thats why this is such a good question.I was standing on the rocks one day at IFAFA beach when this giant of a kingy jumped right out the water onto the rocks chasing a kara,went right between my legs.Will never forget it.I WANT ONE ON THE END OF MY LINE. :sadd
-
So Mike, if one were fishing were there's little to no rocks, a 1mm leader should do?
-
I reckon 1mm should be ok , if u went 1.2 or thicker the xtra drag will tire out the livey quicker and drown , also had a look at a site in NZ they make up some nice heavy duty live bait traces ..heres a pic courtsey of them
-
Sorry that should read www.klabs.co.nz/shop (http://www.klabs.co.nz/shop) , some interesting traces , not sure if for R/S applications or boat applications , but looks like they would work :sml:
-
Yep that does look good. Whilst its always advisable to use hook sizes dependant on the size of the livie, because I want to pre-make some traces, what hook size would you recommend?
-
Clicked on the link. Says page could not be found.
-
Rods, 8/0 and above depending on the size of the livey , using 7/0 and below u run the risk of destroying the hook especially if its a large GT.. unless its a good quality hook.
-
Type in" live bait trace" , google should pick it up.
-
Will do. Abt how long do you recommend the trace be?
-
If its a swimbait trace +/- 1m and if its a slide trace +/- 60cm , if its to long it might get tangled up on the leader.
-
Thanks amillion Mike. (clap) Now for some homework this weekend. :hnthnt:
-
Sure no problem , maybe some other guys will also give some input on a live bait trace fot GT's im just going on how i would make mine up , but theres always room for improvement, good luck on getting one of these :gt: ... its the ultimate catch.
-
I reckon 1mm should be ok , if u went 1.2 or thicker the xtra drag will tire out the livey quicker and drown , also had a look at a site in NZ they make up some nice heavy duty live bait traces ..heres a pic courtsey of them
I would just loose the spring and use either a chaffing tube or thimble. The line pulls between the wires of the spring on big fish.
-
The chances of picking up a GT on dead bait are not good. You need to be very lucky for a Gt to pick up a dead (or non-moving) bait.
Live Bait is always the bait of choice when targetting GT's. So you have the option of either casting a live shad out or sliding it. The problem comes in KZN waters, that Blackfin Sharks also love a llive bait, so you run the risk of being bitten through.
I use the adjustable "Garrick Trace" (in the traces section), except I replace the mono with the red Bleeding wire... 120lb. The nice thing about this trace is that the bottom hook can slide up and down in accordance with the size of your livey. You either cast this out (a difficult thing to accomplish properly - casting live bait is a skill all on it's own) or you attach this trace to a Non-return slide clip.
http://www.ultimateangling.co.za/index.php/topic,199.0.html (http://www.ultimateangling.co.za/index.php/topic,199.0.html)
(http://africanaquatics.co.za/FISHING/Fishing%20stuff/TRACES/livebait.jpg)
http://www.ultimateangling.co.za/index.php/topic,193.0.html (http://www.ultimateangling.co.za/index.php/topic,193.0.html)
Here you want to replace the hooks with 8/0 or 10/0's, and the mono with 120-150lb Bleeding wire.
(http://africanaquatics.co.za/FISHING/Fishing%20stuff/TRACES/GARRICK%20LIVE%20BAIT.jpg)
-
:tkx: Tony. Will definitely give that trace a go. So much to do, so little time. :hnthnt:
-
Tony, had a look. We'll be live-bait fishing for the Gt's at night. Would it still be preferable to use Flouro on the trace line or would normal mono do?
-
We made up sliding traces using 1.0mm leader with 8/0 Mustads (Big game I think). We tied 2 singles back to back with cable tie or snelled the shanks together and pinned the livie just in front of the dorsal.
-
Yup that works well apparently.
The reason I like to use this type of setup, is that if you reel the fish back in, you pull him in the right direction (not backwards) - which would drown the fish.
(http://africanaquatics.co.za/FISHING/Fishing%20stuff/TRACES/livebait.jpg)
-
Reefman, every time I used this trace the bait would "bend" and then seriously hamper it's swimming ability. Am I doing something wrong? Is there a reason for using two hooks? Would this not make it very difficult to release a fish? I suppose it depends on the targeted species and the way they attack the live bait. I have yet to catch a Kingie but for Garrick I use a single circle hooked between the head and dorsal fin. I have a 100% hook-up rate and it is very easy to release the fish again. A lot of the guys here do not use circles and almost all the fish are gut hooked which make it impossible to release. :gt: :grk:
Sorry if this is slightly :topic:.
-
Your points are valid SAFish...
Using 1 hook is great if you allow the fish to swim out. But if you're sliding it out, then 2hooks would be better? 2c
-
I still need to master the art of sliding. :cnfzd