ULTIMATE ANGLING - the Ultimate SA Fishing website
OFFSHORE ANGLING => Boat Tech => Topic started by: UmdlotiOnDad on October 16, 2023, 01:17:47 PM
-
Howzit,
As per thread title, any suggestions?
Thanks
-
Best I came up with was 1000 grit sandpaper and water
-
Thanks John. Got a bottle of Starbrite on its way as well.
-
We use the Starbrite rust remover once a month on the charter boats - works well. Just remember to re wax afterwards.
Also be careful when applying. One overly exuberant spray ended up peeling the paint off a Saragosa and a BG....
-
One way. Thanks
-
Basically any acid will do the trick to a greater or lesser extent. On the bottom end of the scale would be white grape vinegar and all the way up to hydrochloric acid. The recommended one is always oxalic acide, but I didn't have any when I did this a few years back while renovating an old cabin boat, so I used some diluted brick acid (hydrochloric) that I had lying around and it worked a treat. apply with an old brush, leave for a few minutes and then wash it off. Handle with care and wear rubber gloves.