ULTIMATE ANGLING - the Ultimate SA Fishing website

General Angling Topics => Shore Angling => Topic started by: Angler21 on September 04, 2019, 07:32:40 AM

Title: Daiwa Exceller 4000E
Post by: Angler21 on September 04, 2019, 07:32:40 AM
Hello fellow anglers


I require some assistance with my reel, Daiwa Exceller 4000E. For some strange and unbeknown reason to me, I don't hear the drag sounding/clicking when I pull line off the spool under tightened drag.

Can someone please advise?

Thanks
Title: Re: Daiwa Exceller 4000E
Post by: REEFMAN on September 04, 2019, 07:46:55 AM
Under the spool on the shaft is the Drag Click spring. Looks like this...

(http://www.ultimateangling.co.za/articles/exceler%20z/exceler%20z%205.jpg)


The click spring makes contact with a ribbed ridge inside the spool. (Talking from memory here, will need to have a look at my Exceler tonight).

Either your click spring is broken, bent, not making contact with the ridge, or the ridge is worn flat?

Title: Re: Daiwa Exceller 4000E
Post by: Angler21 on September 04, 2019, 08:47:45 AM
Thanks Reefs

Will take a look later.

 :udman:
Title: Re: Daiwa Exceller 4000E
Post by: REEFMAN on September 04, 2019, 10:59:16 AM
So checked my Exceler. Yes there is a ribbed section inside the spool, look underneath. The click spring catches this ridge when the spool turns. Don't think that ridge can really wear, so I'm pretty sure your spring needs to be bent a little to contact the ridge more firmly again.
SimplePortal 2.3.7 © 2008-2026, SimplePortal