ULTIMATE ANGLING - the Ultimate SA Fishing website

General Angling Topics => Shore Angling => Topic started by: Big boy on September 01, 2019, 08:19:08 AM

Title: rod and reels combo
Post by: Big boy on September 01, 2019, 08:19:08 AM
Hi Guys

Please can I have advice on the below

I purchased the Assassin Sabre 12ft spinning long butt. Which of the below reels would be suitable for the rod and what braid and leader should I use.

Okuma Azores z55
Okuma Azores z65

Thanks a mil for u help in advance and tight lines  :fshn:
Title: Re: rod and reels combo
Post by: Visenvryheid on September 01, 2019, 10:18:54 AM
Depends what you want to use it for regarding line, most brands understate the strength 15-20lb in those, some like HMP braid are accurately rated, 20-30lb in those. That range of braid is strong enough for scratching and spinning for most, thicker and thinner both will not handle touching the rocks once under tension but the thinner braid will cast much further..Best of those two reels is the shimmy ;)..

Do a search for "Okuma Azores z55" in the forum search, there have been many discussions over the last few years on this..

Heres one..

https://www.ultimateangling.co.za/index.php?topic=23454 (https://www.ultimateangling.co.za/index.php?topic=23454)
Title: Re: rod and reels combo
Post by: emjay on September 01, 2019, 11:33:29 AM
I would go with the Azores 65. I have a similar class rod, a Sensation Raptor 12ft with a 2 to 4oz cast rating matched with an Okuma Ceymar 65, which is the exact same size as the Azores 65. I feel it's a good match with the rod. It's very versatile. Last weekend I was casting 1oz Toby spoons at shad with it and yesterday I was scratching with a 4oz sinker with it

I fish my Ceymar using 0.45mm mono though, but 30lb braid should be adequate for the setup, however put some mono backing onto the spool first, because your spool will be on the empty side if you get a 300m spool of 30lb braid and only put braid on (depending on thickness of course, which varies with manufacturers)

A 0.60mm mono or fluorocarbon leader would work well in my opinion
Title: Re: rod and reels combo
Post by: Big boy on September 02, 2019, 10:48:22 AM
Shot guys for the info  :uarocks :clwn
SimplePortal 2.3.7 © 2008-2026, SimplePortal