ULTIMATE ANGLING - the Ultimate SA Fishing website

General Angling Topics => Shore Angling => Topic started by: Dennis1984 on August 25, 2013, 03:27:59 PM

Title: Evakool vs safari chiller
Post by: Dennis1984 on August 25, 2013, 03:27:59 PM
Hi all,


Anybody used the evakools, how do they compare to the chillers?


Regards
Title: Re: Evakool vs safari chiller
Post by: Lenny on August 26, 2013, 02:38:41 PM
Wow 174 veiws , no EVAcools ? 


I have an  old Safari , bullet proof .


The Evacool I saw in RSD magazine , I like it , but Am concerned out theit Hinges ?


What size do you have ?




W :welc:
Title: Re: Evakool vs safari chiller
Post by: Jakes on August 26, 2013, 04:11:05 PM
Hi Dennis,

I've got a big 70l Evakool that I use when I go camping and I can vouch that is a very solid Ice box that will hold Ice frozen for 5-7 days. Last year on our way back from Mosselbay we brought some fresh fish that I wrapped and froze and the Evakool kept everthing frozen for 2 days solid while traveling back to Ptown. My only concern for using it for fishing is that it could be a bit heavier than the equivalent Safari and/or Pacfic chillers ...  :dunno: ... can't say for sure because I haven't compared same sizes against each other. On the 70l the hinges are fine but then again I don't carry it around a lot when it's full.

Just my 10c.

Jakes
Title: Re: Evakool vs safari chiller
Post by: Dennis1984 on August 26, 2013, 04:35:42 PM
thanks for the reply guys,


I dont have either, just looking for some advice as am going to buy one next week.


I am looking to get the safari chiller 18L


Regards
Title: Re: Evakool vs safari chiller
Post by: Lofty on August 26, 2013, 05:34:46 PM
what are you gonna use it as mostly?If for fishing I'd go safari chiller... :dunno: got one and is perfect for keeping bait fresh and to cut bait on...might be wrong here,but think the Evacools are more expensive too,if for camping I'd look at the Evacools more closely...price/size/weight/durabillity...etc.compared to other brands...
Title: Re: Evakool vs safari chiller
Post by: Dennis1984 on August 26, 2013, 05:40:47 PM
it will be only for fishing so going to get the chiller as it does have the baitboard in the lid .


Thanks for the replies
Title: Re: Evakool vs safari chiller
Post by: Charles on August 26, 2013, 08:58:31 PM
it will be only for fishing so going to get the chiller as it does have the baitboard in the lid .


Thanks for the replies
Dennis I have both however I use the Safari for fishing and the Evakool to transport my frozen stuff to Sudan. It is a very strong and durable box keeping the frozen stuff frozen for two days.

The only reason I use the chiller for fishing is because of the bait board on the lid which the Evakool don't have.
Title: Re: Evakool vs safari chiller
Post by: peterblace on August 26, 2013, 09:14:19 PM
no wanting to hijack this thread...I have a 45lt safari chiller (fibre glass) and it's top in terms of keeping the chill
when I was washing the boat last weekend I feel the that one of the corners of the cover was a bit soft...the filling it's most probably broken and when you put pressure you feel the softness only on that corner

any idea what can I do with it?
Title: Re: Evakool vs safari chiller
Post by: Lenny on August 27, 2013, 10:55:15 AM
Hi Peter , Sounds like you have a crack or Cracks on the Corners , most Prob from banging on your boat .
I suggest you wash the box very good , let it dry for a couple of days , The foam might be water logged .


Once its a bit lighter , you can seal it with resin . Should be fine for another couple of years ...
Title: Re: Evakool vs safari chiller
Post by: peterblace on August 27, 2013, 11:50:07 AM
no cracks on the surface and no visual damage...what I feel is when I press there's like a lack of cushion on the inside...like if the foam hasn't filled all the inside of the cover
I thought of drilling a small hole and apllying some more foam...then seal it with resin
Title: Re: Evakool vs safari chiller
Post by: Lenny on August 27, 2013, 01:47:39 PM
I must admit , that my Safari are not as light as it once was , but still fine .  It could be where the two moulds come together on the outside of the bottom [ not the lid part]  I know mine has sucked up some water there forsure .
SimplePortal 2.3.7 © 2008-2026, SimplePortal