ULTIMATE ANGLING - the Ultimate SA Fishing website

General Angling Topics => Shore Angling => Topic started by: Dennis1984 on March 05, 2013, 09:52:31 AM

Title: Sand in Penn fathom
Post by: Dennis1984 on March 05, 2013, 09:52:31 AM
hi guys,
got back from a week in St Lucia and unfortunately the weather was against us so fishing not all that good. :-(
the wind was pumping and blew my rod over, so the question is- whats the best household degreaser i can use to clean the reel and to get the sand out of the reel.
 
ps its a Penn Fathom 40 :penn:
 
thank you
Title: Re: Sand in Penn fathom
Post by: Half-Pint on March 05, 2013, 10:10:22 AM
Check out the reel service section. You will find a step by step tut on how to correctly strip and service the reel
Title: Re: Sand in Penn fathom
Post by: doc on March 05, 2013, 10:51:16 AM
Dennis I use benziene to clean all the parts and bearings
Title: Re: Sand in Penn fathom
Post by: REEFMAN on March 05, 2013, 12:14:38 PM
To be sure to get all the sand out, you need to open it up...

http://www.ultimateangling.co.za/index.php?topic=10066.0 (http://www.ultimateangling.co.za/index.php?topic=10066.0)
Title: Re: Sand in Penn fathom
Post by: pieta on March 05, 2013, 07:02:58 PM
I normaly strp the hole reel and clean it part by part with a butler. Nothing cleans the greaze like a butler. The steam remove all the greaze, oil and sand. It is also the only way to get all the greaze from the drag washers. Let the spares lie and dry for a day while you soak your bearing in your joice of oil. Been doing it for years. Remember to losen the drag compleetly when the reel is not in use. This help to save the drag washers and prevent the drag of getting sticky.
Title: Re: Sand in Penn fathom
Post by: Dennis1984 on March 05, 2013, 07:37:31 PM
thanks a million guys,
 
i have stripped it down, cleaned and re greased everything. just have to put the left hand sideplate back on now.
 
 :tkx:
SimplePortal 2.3.7 © 2008-2026, SimplePortal