ULTIMATE ANGLING - the Ultimate SA Fishing website
General Angling Topics => Shore Angling => Topic started by: deepblu on July 12, 2012, 03:57:40 PM
-
After hearing and seeing many guys including myself having problems rigging up alive bait trace. With either the bait not been rigged correctly resulting to missing a fish on the take, hooks pulling while trying to get your livie out there or like I’m sure something that has likely happened to all of us is ending up with not so alive bait on the other end because the livie as died!!! Don’t get me wrong there is nothing wrong with rigging live baits the way we do this works very well, but I have missed some bites due to incorrect rigging. Or simply not having a live bait on my hook when reeling in.
Method 1:
(http://www.ultimateangling.co.za/MGalleryItem.php?id=763)
This got me thinking how can I rig my live bait keep it alive for longer be able to get it out into the water and still keep the hooks in place and proud.
Method 2:
This is a method that is very popular and that anglers use on a regular basis. By simply hooking a J-hook or circle hook thru the top jaw of your bait making sure you don’t put the hook to far back and end up killing the fish. Once you have your bait rigged simply add a soft rubber glow bead or float stopper over the point of the hook and move the stopper has close to your bait a possible this will keep the hook from moving around, this can also be used in the J-hook to circle hook rig where a J hook is atthached to the bend of the circle hook. The J hook is hooked thru the baits top jaw with the stopper going over the J hook leaving the circle hook proud. Here some pics to get a better understnading of the above.
note where the bead or stopper is placed to keep hook proud and in place.
(http://www.ultimateangling.co.za/MGalleryItem.php?id=769)
(http://www.ultimateangling.co.za/MGalleryItem.php?id=764)Circle hook rigged with J hook
Method 3:
This is just something I have been thinking about in theory and I haven’t had the chance to put it to the test. The bridal rig this method is used with huge success by the off shore angler this got me thinking why can’t we try this for rock n surf (if anyone has please I would love to know the outcome) this might take a little more effort and a few seconds longer but we all know a well presented bait is the way to go that might just entice a patrolling predator to latch on to your bait. But now comes the big question we fishing from the shore not a boat, whereas from a boat the bridal rig and bait is just dropped into the water with very little or no casting required. If we look at how to rig up a bridal rig like in the video blew the elastic band is put thru a very tough part of the baits head and there wouldn’t tear out very easy. And when fishing with live bait you use more of a lob than a cast unless of course you are sliding. And when make a lob/cast the elastic band will act like a shock absorber this less chance of your hooks pulling or tearing out of your livie and will also keep your hook in place. I just think this could help eliminate problems of livies dying and getting a better hook up rate? Like I said it’s a theory will it work or wont it? Maybe some of the regular fishermen on the coast would be willing to try this out and see how it would perform over the current live bait rigs. And with the ever growing usage of circle hooks I’m sure this method could work hand in hand.
How to rig up a bridal rig:
(http://www.ultimateangling.co.za/MGalleryItem.php?id=765)(http://www.ultimateangling.co.za/MGalleryItem.php?id=766)(http://www.ultimateangling.co.za/MGalleryItem.php?id=767)
(http://www.ultimateangling.co.za/MGalleryItem.php?id=768)
heres just a video showing how to rig up a bridal
How to bridle rig a live bait (http://www.youtube.com/watch?feature=player_detailpage&v=cu0-PPYhP-w#)
-
:tkx: Lekker post!
-
:resp: :win: Post Deepblu
Thanks for sharing :+ cred:
-
thanks guys was a bit worried what the guys would think of the ideas..... hope to hear more in puts :tkx:
-
Nice post Deepblu!
I'm keen to try the Circle with the tiny J-hook. Tommo has been using it in the estuaries and it seems to work well. The smaller J-hook does very little damage to the fish and so it stays live for much longer...
-
Good post!
I have used the bridal rig on live shad and used dental floos for the bridal, its much thicker which assisting in not tearing out when casting. Has worked well for me.
The guys have been using a small cable ties in a similar fashion for bridal rigs so assume this also works well
-
thanks reefz and durran. Reefz do u think one could apply this technique to sliding? did any1 watch freespool last night hahaha wesley missed a garrick becuase of a hook turning into the bait good example of what i was talking about. has any1 go more info on the type of bait clip they were using looks interesting. durran i know guys use mono, braid and like u say dental floos, would the elastic work im thinking with its thicker diameter and springy effect that it will do even less damage to the bait.
-
(clap) Will surely work ... :tite
-
need to get down to the water and try this out :yipee:
-
Howzit Deepblu, we have used the bridal rigged circle alot for billfish and find that its better if you put a spacer bead between the head of the bait fish and the hook, this keeps the gap and the circle sets better, it also stops the hook turning back into the baitfish, you can use beads plastic tube or anything like that, +-20- 25mm long.
-
nice post , Method Nr 1 . We have tried and tested a few ways , sliding livies . What I have found is that if you rig the live in a swimming away from your slide . The Livie must lead the way IMO , this gives you less hassles and shaking you rod , let the livie do the work ,of getting to the ring. Also if they swim away from the clip and reach the ring , they tend to not tangle up on your leader as easy as the other way [method nr 1] you showed , thus creating less chance of tangles and burnoffs.
Another good way to tig livebaits on a slide is to , use a piece of heat shrink , put two hooks back to back and only use the one hook on the bait , thus leaving a big open proud hook for a fish .
Livebait essensials R & S : big sharp hooks , match the hook sizes with your livies , dont slide a Shad with a 0/8 . Smaller hooks tend to turn into your livebait when you get a pull , one should keep in mind that the pedator eating your livebait he want to EAT and KILL the livie , act accordingly with end tackle !
Toothpicks, for securing hooks in fish .
Dentalflos , soft copper wire , or Dacron Cable
Ties ' rigging material '
BAit needle ! very important if you want to cast livies .
-
:tkx:
Adapt I say....
Same day rigged with bridal's twice with 20cm live mullets. Sharp tuck and reeled the heads in?? Then put a second hook at the mid section and.........wait for it............no bites!
-
:tkx:
Adapt I say....
Same day rigged with bridal's twice with 20cm live mullets. Sharp tuck and reeled the heads in?? Then put a second hook at the mid section and.........wait for it............no bites!
Must be an Elf / Tailor , they are known to do it .