Author Topic: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH  (Read 37361 times)

0 Members and 1 Guest are viewing this topic.

Offline Visenvryheid

  • Ultimate member
  • ***
  • Posts: 528
  • Cred: 30
  • Gender: Male
  • Fishing and freedom! Thank the Almighty!
  • Location: Cape Town
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #40 on: December 21, 2019, 10:30:56 PM »
Think it is a spacer bush on the inside, around the spool shaft?

Offline Visenvryheid

  • Ultimate member
  • ***
  • Posts: 528
  • Cred: 30
  • Gender: Male
  • Fishing and freedom! Thank the Almighty!
  • Location: Cape Town
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #41 on: December 21, 2019, 10:35:23 PM »
The top piece...? got no idea, show us a pic of the other side of that piece?

2nd: Brass washer that fits inside the Cast Control Cap - see the Yellow piece inside the Cast Control cap?



3rd: Ratchet washer that fits underneath the Cast Control Clutch lever

Some of these pics below are from a Grandwave, but the same principle applies....





4th: Teflon bushing that fits onto the spool shaft (This is what the Grandwave looks like, but the SL50 should be very similar).





5th: Clutch spring that fits inside, onto the Cast control lever







Offline GW

  • Member
  • *
  • Posts: 6
  • Cred: 0
  • Gender: Male
  • Location: Durban, KZN
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #42 on: December 22, 2019, 12:42:09 PM »
Thanks for the reply.
For some reason I canít view the images so I donít know what no 4 is referring to.


The spacer is the same on both sides.


Regards,


Greig
greigwegerle@gmail.com




Offline REEFMAN

  • Ultimate Champ
  • ****
  • Posts: 9617
  • Cred: 763
  • Gender: Male
  • Location: Jozi
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #43 on: December 22, 2019, 06:16:40 PM »
Don't have a pic of the Sealine, but this is one of the Grandwave spool, it should be pretty similar...
#QAnon   
#TheGreatAwakening

Offline REEFMAN

  • Ultimate Champ
  • ****
  • Posts: 9617
  • Cred: 763
  • Gender: Male
  • Location: Jozi
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #44 on: December 22, 2019, 06:22:54 PM »
On the SL50SH schematics, it is part 72, called COLLAR.
#QAnon   
#TheGreatAwakening

Offline GW

  • Member
  • *
  • Posts: 6
  • Cred: 0
  • Gender: Male
  • Location: Durban, KZN
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #45 on: December 23, 2019, 12:20:02 PM »
Awesome. Thank you.

Offline CammyCakes

  • Member
  • *
  • Posts: 4
  • Cred: 0
  • Gender: Male
  • Location: Durban
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #46 on: July 01, 2020, 02:35:52 PM »
Thanks for this guide @REEFMAN ,
I managed to run through the service with no problem, the reel is back together and I can notice a huge improvement in performance. however the issue that lead me to do the service still exists, the cast control is very loose, even when fully tightened, I got the reel a good few years ago and don't remember it behaving like this. Is there anything I can do to rectify this?  :dunno:

Offline Visenvryheid

  • Ultimate member
  • ***
  • Posts: 528
  • Cred: 30
  • Gender: Male
  • Fishing and freedom! Thank the Almighty!
  • Location: Cape Town
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #47 on: July 01, 2020, 07:09:43 PM »
Not reefman but mag the reel and leave the cast control loose? Mine not been adjusted since I can remember..but wait for reefman maybe something missing?

Offline CammyCakes

  • Member
  • *
  • Posts: 4
  • Cred: 0
  • Gender: Male
  • Location: Durban
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #48 on: July 01, 2020, 07:48:42 PM »
@Visenvryheid, out of interest how would I do that?

Offline ianf

  • Ultimate Champ
  • ****
  • Posts: 778
  • Cred: 37
  • Gender: Male
  • Location: Randburg, Gauteng
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #49 on: July 02, 2020, 07:05:51 AM »
Speak to Brandon (Fishatic) on this forum. He mag'ed both my Sealine 50 and my Saltiga. What an awesome difference it made. Can't understand why the manufacturers don't do this as a standard??? Brandon is in JHB, so you will need to send your reel up to him, but hey, it's well worth doing.

Offline REEFMAN

  • Ultimate Champ
  • ****
  • Posts: 9617
  • Cred: 763
  • Gender: Male
  • Location: Jozi
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #50 on: July 02, 2020, 07:25:42 AM »
Thanks for this guide @REEFMAN ,
I managed to run through the service with no problem, the reel is back together and I can notice a huge improvement in performance. however the issue that lead me to do the service still exists, the cast control is very loose, even when fully tightened, I got the reel a good few years ago and don't remember it behaving like this. Is there anything I can do to rectify this?  :dunno:

If you look at the pic below, the Cast control cap has a brass washer inside it. That's probably missing in your reel. Without it, the Cast control knob won't work.


#QAnon   
#TheGreatAwakening

Offline CammyCakes

  • Member
  • *
  • Posts: 4
  • Cred: 0
  • Gender: Male
  • Location: Durban
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #51 on: July 02, 2020, 08:49:24 AM »
Thanks ianf, ill keep that in mind,
Reefman, the brass washer is there, maybe its worn? I've noticed that (with the cap off) the spool has quite a lot of left-right travel, could it be that the cast control is not compressing the shaft properly and bottoming out because of this?

Offline REEFMAN

  • Ultimate Champ
  • ****
  • Posts: 9617
  • Cred: 763
  • Gender: Male
  • Location: Jozi
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #52 on: July 02, 2020, 06:10:15 PM »
No I'm not talking about the Brass bushing, I'm talking about a brass washer, that fits INSIDE the Cast Control cap, look carefully at the pic I sent.
If it is there, take it out and invert it so that the worn part in the middle will be inverted.
#QAnon   
#TheGreatAwakening

Offline CammyCakes

  • Member
  • *
  • Posts: 4
  • Cred: 0
  • Gender: Male
  • Location: Durban
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #53 on: July 02, 2020, 06:35:51 PM »
I figured that's what you ment. Its there but I had a spare so it seems a bit better, going to have to take it for a test. Tanks mate  :tkx:


Offline REEFMAN

  • Ultimate Champ
  • ****
  • Posts: 9617
  • Cred: 763
  • Gender: Male
  • Location: Jozi
Re: DAIWA SEALINE SL50SH SERVICE and Maintenance - SL50SH
« Reply #54 on: July 03, 2020, 07:48:48 AM »
If it's still not tight enough, try putting both in and see if that makes a difference.
Sounds like both the washer and spindle of the spool are worn badly.
#QAnon   
#TheGreatAwakening

 

SimplePortal 2.3.7 © 2008-2020, SimplePortal