ULTIMATE ANGLING - the Ultimate SA Fishing website
General Angling Topics => Bait & Bait Presentations => Topic started by: REEFMAN on June 21, 2011, 05:18:04 PM
-
To throw a whole sardine as a Drift bait... this is the way I rig mine.
#6 American fishing wire.
Size 5/0 or 6/0 hooks
#6 Power swivel
All knots are Haywire twists.
Tie 10cm wire to swivel, other side to a hook.
Tie another 5-8cm to another hook, and tie the other end to the eye of the first hook.
You can add a small sliding sinker to the leader just before the swivel if you want to submerge the bait a little.
-
Pin the Sardine with the top hook through both jaws. Then the bottom hook, lightly through the body. No cotton necessary, maybe just a pin for the bottom hook.
-
(clap) ... :shre: .... :win:
Personally i put hooks the other way around ... tail hook is on the belly side ... w;k
-
Awesome as always Reefz (clap) (clap)
-
Tie another 5-8cm to another hook, and tie the other end to the eye of the first hook.
Reefs, this is awesome ! Exactly what I used on the spinning stick.
If I can make a suggestion, when attaching the second hooksnoot, attach this through the eye of the hook, AS WELL AS THE Haywire twist attaching the 1st hook. Depending on the hook, the wire can slip through the eye, and result in a lost fish.
My humble 2c
-
Besides on spoon, always fun to catch shad on the drift :) Also taken a few double digit kob this way too ;) Nice post Reefz :)
-
if ya want to, add a bung to it (about 1 meter away) and use it when fishing over rocks.
-
I do my driftbaits slightly different. The first major difference is I only use a single hook and this I hook throught the eye socket and then through the base of the tail as close as possible to the tail itself. Another thing that I also do it to cut-off the tail fins as this helps with the stability of the bait in the water and prevents it from spinning in a strong current.
Sorry for using your pick Tony, but here's a rough example of how I do it.
-
I do mine exactly the same Jakes.
-
Dumb question. Will it work if you slice the sardine and and put those float stuff in it and let it drift in the stream? :dunno:
-
Dumb question. Will it work if you slice the sardine and and put those float stuff in it and let it drift in the stream? :dunno:
No reason that it won't work Willie and in fact I have tried it before with varying success. Two issues I have with that method is that your sard doesn't last as long especially if you have to re-cast it a couple of times and generally speaking if the shad arrive they arrive in numbers so you don't have to try too complicated methods to catch them.
In my experience I have found that they feed and take in one of 3 ways (in order of preference):
1.) Driftbait, either with a small weight or without feeding in the middle to upper water column.
2.) Spoon, Toby or similar lookalikes are my favourites when feeding in the top water column.
3.) Using traditional shad trace with sinker and feeding on the bottom to lower water column.
Hope that helps.
-
Thanks Jakes I have been playing around with that idea for a long time now but never tried it.
-
Willie,
Jakes has summed it up !
Why I would not use foam,
The bait is fairly buoyant, and with drift bait fishing, you have to reel in constantly to take up slack caused by wave action. This keeps the bait in the strike zone.
The foam will cause the bait to remain right on the surface, and i would think that in the white water, you lessening the chances of a take.
Depending on conditions, i would also put a small (1/2 - 1ounce) ball sinker, to keep the bait just below the surface
-
Thanks Homie at Rocky bay is an area with a nice gully (depending on storm conditions) and on a calm day a strong stream flows over the gully towards the rocks. It has happened on a few occassions that I picked up a bite from Kingy's as soon as my bait hits the water in this area.where the gully is, but never had a bite other than lesser sand sharks so I thought that this might work by letting the bait drift towards the rocks.