ULTIMATE ANGLING - the Ultimate SA Fishing website
General Angling Topics => DIY Rodbuilding => Topic started by: Andre Laas on December 15, 2010, 10:31:36 AM
-
This area is dedicated to the discussion of Components used in rod building (actually more rod assembly)
Those in the know, please share information on
Line guides - what to use, where to get them, what sizes etc
Reel seats - Where can we get them, and which is best
Grips - What to use for what application... EVA, Shrink grip etc
Handles, Gimbals, Decals, Epoxies, Inlays, Ferrules, Hook keepers, Tapes, Winding checks etc
Discuss it all here
-
The following companies supplies nice components, but we will have to import:
www.mudhole.com (http://www.mudhole.com)
www.merricktackle.com (http://www.merricktackle.com)
http://www.jannsnetcraft.com/rod-building/ (http://www.jannsnetcraft.com/rod-building/)
http://www.shofftackle.com/ (http://www.shofftackle.com/)
-
The following two companies supplies nice components, but we will have to import:
www.mudhole.com (http://www.mudhole.com)
www.merricktackle.com (http://www.merricktackle.com)
I have just ordered from Mudhole (my second time) and no problems, prices are good and shipping cheap! I prefer it as they have good stuff which I cannot find locally like the Alconite guides.
-
PacBay Components
http://www.fishpacbay.com/index.html (http://www.fishpacbay.com/index.html)
Excalibur Tackle is the african distributors for PacBay components
http://www.excalibur-tackle.com/ (http://www.excalibur-tackle.com/)
-
Pacific Bay & Fuji are the top brands of these kinds of products
-
Alps are flipping good! My first choice are Fuji then Alps.
-
Out of interest, I just received some goodies from Muhole. The service was incredible. Delivery was sharp and the cheapest I've ever paid for postage from anywhere internationally. They even sent me the tip top as a back order no cost to me!!!
On another note, I came up with a good idea to refurb your rod grips. Instead of buying the rubber shrink tube @ US$10.25 per foot (305mm). I'm going to try HD Electrical heat shrink. Comes in 38mm OD and costs R66 per meter (1000mm). Available in Red, Blue, Black, white and yellow. I've ordered some which will be with me tomorrow. Will give some feedback tomorrow night.
-
Should work a charm!
-
Should work a charm!
They look pretty awesome!!
I also in the process of doing a refurb of one of my old rods. A Blue Marlin G3. Gonna clean it down and keep the blank bare, new guides, new grip, new butt section, trigger winch etc, etc.
Built myself a rod turner from a microwave motor for the drying of the epoxy. For binding I made wood blocks with a V cut in with little roller wheels covered with felt. I prefer to turn my rod by hand when binding the eyes.
Going for a 22mm Fuji Trigger whinch, x-flock shrink grip and Fuji BNOG guides (Black Stainless Steel).
Hopefully it turns out GOOD!!
-
They look pretty awesome!!
I also in the process of doing a refurb of one of my old rods. A Blue Marlin G3. Gonna clean it down and keep the blank bare, new guides, new grip, new butt section, trigger winch etc, etc.
Built myself a rod turner from a microwave motor for the drying of the epoxy. For binding I made wood blocks with a V cut in with little roller wheels covered with felt. I prefer to turn my rod by hand when binding the eyes.
Going for a 22mm Fuji Trigger whinch, x-flock shrink grip and Fuji BNOG guides (Black Stainless Steel).
Hopefully it turns out GOOD!!
Cool, I'm sure it will. Keep us updated at you go along step by step from where you source your bits and pieces to the final product!
-
I think it looks good.
This is a KF Poseidon jigging rod. It has a blue grip full of doggy teeth marks. Now looks snazy in red!
Actually very tough and good grip!
-
Definately keep things rigid. :hehe: