ULTIMATE ANGLING - the Ultimate SA Fishing website
General Angling Topics => DIY Rodbuilding => Topic started by: Lenny on June 11, 2017, 07:00:52 PM
-
Guys , I need to understand the ratings on the super slim rods .
I see ratings such as 40/80/ 450 , am I assuming corectly that the length are the 430 ...
I am after a nice and soft 13 ft max casting weight 6 ounce .
The ones that I have seen are super pricey , but the ones I have seen and fished a bit with I was very chuffed , but it seems the owner of the two rods , did not understand the ratings or were not able to explain to me .
Any info regarding them , would be much appreciated .
-
Here we go Lenny :1st digits indicate tip rating --- 2nd digits indicate % of carbon in the blank and last digits are the length eg : 40-100-430 = 4oz tip / 100% carbon / 4m30cm length , have a look at the bluemarlin website all the specs are there .... and they are awesome blanks ... w;k
-
yA Mike is right. I think the first rating is the midrange of the oz rating of the rod. I have a 50-100-430, which throws a 6oz best, so I would rate it 4-6oz with the 50 rating being the midrange. 100% Carbon signifies full HMG, 50 signifies 50% Carbon, 50% composite/glass.
-
Ok so it's not rocket science , thanks Mike for the pm , I will follow it up .
Did have a look at the website , one blank stands out , with regards to my requirements ...
So with regarding to the amount of carbon 50 80 and 100 , what's the pros and cons ?
I would imagine the 100 are a verybritle structure ...
-
Lenny, I have a masterpiece - a Brandon McQueen Custombuilt SS 50-100-420 3 piece, with adjustable Bionic finger and genuine Fuji Low rider concept guides, if you're interested, might be persuaded to sell mine. :hnthnt:
-
I agree with REEFZ, a Brandon McQueen Custom built with Low riders is a winner.
-
Thanks reefman .
But I am after a multiplier rod . Just out of interest , what did the stick sit you back ?
-
Lenny , with the bionic finger setup the reel seat is low on the rod like a multiplier , so its pretty much the same , u can use the rod as a spinning set up with a grinder or with a multiplier .
-
Ya Mike is right, I can throw a Grinder or Multiplier with mine.
Also, my Bionic finger is detachable. Is held on with rubber o-rings.
Think I paid R4800 for mine, including the new Low rider guides.
Will sell for R4000.
-
Reefz' rod is a 50-100-420.
Will handle a multiplier easy peasy.
I know 'cause I built it and I tested with both.
Bargain actually....
-
Reefz' rod is a 50-100-420.
Will handle a multiplier easy peasy.
I know 'cause I built it and I tested with both.
Bargain actually....
Thanks man , Mike send me a pm , and suggested I contact you . Thanks for you input .
Will still have to scrape some dosh together for this one .