ULTIMATE ANGLING - the Ultimate SA Fishing website

General Angling Topics => Knots => Topic started by: krissi on January 16, 2015, 06:39:10 AM

Title: FG Knot
Post by: krissi on January 16, 2015, 06:39:10 AM
Found this clip on facebook - I use this to tie braid leader to braid and will definitely try it for braid to mono leader.

http://www.saltstrong.com/articles/best-fishing-knot-for-braided-line/ (http://www.saltstrong.com/articles/best-fishing-knot-for-braided-line/)
Title: Re: FG Knot
Post by: SAfish on January 16, 2015, 07:57:17 AM
I also started using the FG knot after Gerhard showed me this video. Not very difficult to tie and it is very strong. I use it to connect my mono leader to 20lb braid.

http://youtu.be/Rj9I4j0Jj9c (http://youtu.be/Rj9I4j0Jj9c)
Title: Re: FG Knot
Post by: Jordz on January 16, 2015, 08:18:27 AM
I have started using this while throwing paddle tails for kob. I am sold on this knot as it works like a charm. and it can go through your top eye unlike many other knots when using lighter rods such as an exceller

Title: Re: FG Knot
Post by: Gerhard on January 16, 2015, 04:24:53 PM
I have started using this while throwing paddle tails for kob. I am sold on this knot as it works like a charm. and it can go through your top eye unlike many other knots when using lighter rods such as an exceller


Jordz,


Yes its a small diameter knot but it is still not recommended to cast the knot trough the eyes.


Make the leader around 40-50cm depending on the lenght of your rod as to ensure the knot is just outside the rod tip eye.



Title: Re: FG Knot
Post by: Ziggy on January 16, 2015, 04:38:04 PM
I have started using this while throwing paddle tails for kob. I am sold on this knot as it works like a charm. and it can go through your top eye unlike many other knots when using lighter rods such as an exceller


Jordz,


Yes its a small diameter knot but it is still not recommended to cast the knot trough the eyes.


Make the leader around 40-50cm depending on the lenght of your rod as to ensure the knot is just outside the rod tip eye.


agreed 100% - once you have cracked/dislodged the ceramic in that tip eye and shredded your braid, you will never again cast the knot through the tip eye
Title: Re: FG Knot
Post by: REEFMAN on January 19, 2015, 08:27:48 AM
Tried the version Krissi posted, this weekend... easiest version yet!  :+ cred:
Whether I'm confident enough to actually fish with this knot yet and replace the 7 turn Uni/Fig 8...  :dunno: - still need to practice it some more!
Title: Re: FG Knot
Post by: Gerhard on January 19, 2015, 08:33:53 AM
Tried the version Krissi posted, this weekend... easiest version yet!  :+ cred:
Whether I'm confident enough to actually fish with this knot yet and replace the 7 turn Uni/Fig 8...  :dunno: - still need to practice it some more!


Tony,


Just tie the leader onto a Bakkie Bull Bar take 10 steps back and pull as hard as you can... :crzy


The knot will not go and you will get the confidence in the knot...


Straight stick the knot as well... :hnthnt:
Title: Re: FG Knot
Post by: REEFMAN on January 19, 2015, 08:45:58 AM
I hear you Gerhard, but that's what I can do with my 7 turn Uni/Fig 8 jobbie... which I can do in half the time it takes me to do the FG Knot... wish I had a proper Knot testing machine...

Look, let's face it, if I'm going Popping off the boat targetting big GT's and the like, then it's going to be a PR Knot... that's not even debatable anymore, but whether I really need to switch to the FG Knot for my light tackle spinning setups off our SA beaches... well, who knows!? Time will tell...
Title: Re: FG Knot
Post by: Cam Mundy on January 19, 2015, 08:52:15 AM
I hear you Gerhard, but that's what I can do with my 7 turn Uni/Fig 8 jobbie... which I can do in half the time it takes me to do the FG Knot... wish I had a proper Knot testing machine...

Look, let's face it, if I'm going Popping off the boat targetting big GT's and the like, then it's going to be a PR Knot... that's not even debatable anymore, but whether I really need to switch to the FG Knot for my light tackle spinning setups off our SA beaches... well, who knows!? Time will tell...

I agree the FG is a great knot but I personally don't use it as there are quicker easier knots out there especially when you are fishing leaders below 60 lbs. 
Title: Re: FG Knot
Post by: Gerhard on January 19, 2015, 08:54:34 AM
I hear you Gerhard, but that's what I can do with my 7 turn Uni/Fig 8 jobbie... which I can do in half the time it takes me to do the FG Knot... wish I had a proper Knot testing machine...

Look, let's face it, if I'm going Popping off the boat targetting big GT's and the like, then it's going to be a PR Knot... that's not even debatable anymore, but whether I really need to switch to the FG Knot for my light tackle spinning setups off our SA beaches... well, who knows!? Time will tell...


True,


You need to fish with what you feel comfertable with.


I have standardized to the FG Knot on all casting outfits and the PR Knot for jigging.


Both are friction knots and both are nice and small profile knots.


Play a bit in the back yard with the knots and let me know...
Title: Re: FG Knot
Post by: SAfish on January 19, 2015, 09:26:59 AM
Krissi's video shows an easier method but I will combine it Gerhard's video and lock it down after 8 wraps and then do the rest of the wraps just to ensure that it is properly locked in place.   
Title: Re: FG Knot
Post by: Zak-e-Boy on January 19, 2015, 10:52:06 AM
Guys from what i have read this FG knot seems to be causing a lot of discussion of late. I have attached the gadget, which I use, which makes the FG knot, in my opinion, one of the more easy knots to tie. See the attached picture. Simply string the bow with your braid, not too tight as it will tighten more as you proceed, tie the knot as shown in the many you tube videos around, Krissi's one is very easy to follow. You can hook the hanger around your big toe, fishing bag or any "old bag" you have around. The ends have been drilled and slotted to accommodate the braid and the prestik will hold the line ends in place. Wrap the braid around each end about six times and stick down with the prestik. Proceed as instructed in Krissi's video or any other video. Always pull your leader tag end up or down parallel to the braid when forming the loops around the leader line. Undo the tag end first, tie off the overhand knots and only then remove the mainline. You can wet the braid slightly in the areas that you know will be forming the knot. You should get a perfect, tightly wound, knot after one or two attempts.  w;k 
[size=78%] [/size]
Title: Re: FG Knot
Post by: Cam Mundy on January 19, 2015, 01:46:23 PM
Ha ha that's genius you can buy FG knotters for a ton of loot that do the same thing brilliant.
Title: Re: FG Knot
Post by: REEFMAN on January 19, 2015, 01:53:55 PM
Ya that's a genius tip right there!
 :+ cred:
Title: Re: FG Knot
Post by: Poenie on January 19, 2015, 02:24:15 PM
I HATE knots where you need a tool, it's just ANOTHER thing that can be forgotten or lost! I also don't like a knot where tension has to be applied as in the first video - that's why I use the method in this video when tying the FG (only the criss-cross part). I don't use a lighter either.
https://www.youtube.com/watch?v=a4GCH6i5L2I (https://www.youtube.com/watch?v=a4GCH6i5L2I)
Title: Re: FG Knot
Post by: krissi on January 19, 2015, 02:49:36 PM
I HATE knots where you need a tool, it's just ANOTHER thing that can be forgotten or lost! I also don't like a knot where tension has to be applied as in the first video - that's why I use the method in this video when tying the FG (only the criss-cross part). I don't use a lighter either.
https://www.youtube.com/watch?v=a4GCH6i5L2I (https://www.youtube.com/watch?v=a4GCH6i5L2I)

I tried this way first but because of the beginning of arthritis in my thumbs, my hands are a lot weaker so I battled with that triangle thingy for the tension - soon as you slacken on the tension, the knot goes pear-shape.  Not knocking this method, just saying it didn't work for me.

Title: Re: FG Knot
Post by: Poenie on January 19, 2015, 02:53:11 PM
Well in that case, I'm glad there are alternatives that still work for you - 'cause that CERTAINLY is a "must-have" knot in your arsenal!
Title: Re: FG Knot
Post by: Zak-e-Boy on January 19, 2015, 03:21:35 PM
Poenie, i think everyone has their own likes and dislikes, no offence.  Krissi get someone to knock up that gadget for you and you won't look back, especially if you are having arthritis problems. It's simply another pair of hands and your knots will be formed absolutely perfectly each time, even in a strong northeaster on a ski-boat. w;k   
Title: Re: FG Knot
Post by: krissi on January 19, 2015, 03:34:36 PM
Will do - thanks Zak-e-boy  :bow:
Title: Re: FG Knot
Post by: Asprit on January 19, 2015, 05:03:53 PM
I was out fishing and my braid leader snapped on my cast,then to quickly get back into the action i made a bimini twist and double uni to figure 8 from my 50lb braid to mono 0.9mm,hooked a steamer got pulled into my backing and all of a sudden lost connection,reeled out and to my suprise the bimini was still there but leader gone,ive always had braid stitched loops and catpaws from braid to braid leader,however i would like to know how the fg knot would compare to the braid stitch,what do you guys think?
Title: Re: FG Knot
Post by: Trevour on January 19, 2015, 08:48:47 PM
Hi guys,

I see some do and some don't recommend the knot for casting. Are there any extra pointers as far as the guides and rod setup that may assist with a braid to mono leader. For instance, will the knot pass through low riders etc. And do smaller diameter reels that release line in smaller loops help?

And can anyone shead light on why braid to mono gives so many problems, we cast biminis, catpaws and fig 8's with mono to mono, but even tiny knots cause problems with braid.

Title: Re: FG Knot
Post by: SAfish on January 19, 2015, 09:33:37 PM
Trevour, it is simple, don't let the knots pass through your guides. I had no problems since I stopped using long leaders, I now only have a short leader and check my braid for wear often. Get a good casting braid, it is worth the bucks.
Title: Re: FG Knot
Post by: Johane on January 20, 2015, 06:48:21 PM
Here is another version which works quite well https://www.youtube.com/watch?v=52uWL43hUbw (https://www.youtube.com/watch?v=52uWL43hUbw)
Title: Re: FG Knot
Post by: krissi on January 20, 2015, 07:10:29 PM
That looks very do-able.  Thanks Johane  :bow:
Title: Re: FG Knot
Post by: Alf03 on March 20, 2016, 10:35:07 AM
I have been practicing this knot and I am going to try it on GTs in kosi. Anyone had any bad experiences with knot strength using it?
Title: Re: FG Knot
Post by: FishStyx on March 21, 2016, 07:37:28 AM
Personally never had one fail on me. Trick is to keep the braid turns tight and bunched together, and to put the knot under a lot of strain before clipping the tag on the leader.
Title: Re: FG Knot
Post by: Alf03 on March 21, 2016, 08:02:43 AM
Think I have got it right. Tested the last knot I made couldn't break it. Tied my line around a concrete and steel pole and pulled as hard as I could!
Title: Re: FG Knot
Post by: Vandit on March 21, 2016, 09:28:05 AM

And can anyone shead light on why braid to mono gives so many problems, we cast biminis, catpaws and fig 8's with mono to mono, but even tiny knots cause problems with braid.

I reckon there is culmination of two reasons for this on fixed spool reels:

1.) Large differences in elasticity (stretch): When casting off of braid with a leader that is not completely out the guides, i.e. with a knot in the guide train, the leader absorbs the majority of the elastic energy before release.  This is because it has a much lower modulus of elasticity and thus stretches considerably more for a given diameter.  As you release during the cast all this energy has to go somewhere - it goes into pulling extra line off the spool, much faster than the speed at which the casted projectile flies, resulting with excess line in the guide train.  With a long mono leader this also happens but mono is much stiffer and heavier (it doesn't bunch up and flap around) so it contracts like a coil spring. Braid on the other hand doesn't have as much "memory" and is much lighter causing it to bunch up in an erratic fashion causing guide wraps, wind knots and the like. This effect is only momentary, as soon as the casted projectile reaches the length of extra line pulled off during the strain energy release, it continues to peel line off at it's speed.   This is easily solved in two ways - casting off a long leader with wraps on the spool or a short leader out the guides.


2.) Large differences in mass or rather an abrupt transition in mass:  The intuitive understanding of line coming of a fixed spool reel is essentially a coil of rope pulled into a straight line. This is somewhat true for the first layer on the spool, when the diameter is the same as the spool lip.  But as the the spool starts emptying, the line has to be pulled around the spool lip.  For low line speeds, this makes near as no difference.  But when the line speeds are high enough for momentum effects to become apparent, things become interesting. The direction of line momentum has to change from initially pointing towards the spool lip to finally pointing to the centre of the first guide.  Consider this analogy:

https://www.youtube.com/watch?v=DDSRsMGbNV8 (https://www.youtube.com/watch?v=DDSRsMGbNV8)

Here the momentum change is from initially pointing upward to finally pointing downwards.  For low speeds the momentum can be changed quickly (seemingly on the lip of the jar), for high line speeds this happens over a greater distance.

Now this is not exactly the same as what happens on a fixed spool reel but the fundamentals remain the same.

The problem comes in when the join of nylon and braid has to pass through this.  Imagine having a skip rope with one half length chain and the other half string.  Imagine how that would look when spinning around.........  The mass transition of the nylon to braid is exactly this - the braid doesn't have enough mass to keep that smooth change in momentum (stabilise the nylon).  The nylon end thus flails about uncontrolled in a larger arc causing rod slap etc.  This all results with a higher propensity for guide wraps.  This doesn't necessarily mean that only the first guide is at risk, this disturbance is passed along the entire rod - but the probability does decrease towards the tip.

Theoretically there are few remedies for this:
- A properly set out guide train to manage exactly this (Avoiding massively inappropriate spacing between guides or the spool for instance... Unlike the.. Assassin Horizon... cough cough)
- Casting off a properly filled spool
- Tapered leaders - the mass transition is not as abrupt but I doubt many would follow suite due to price


There may also be other phenomena that cause issues, this is just given to show that there is much more at work than just knot size.
Title: Re: FG Knot
Post by: REEFMAN on March 21, 2016, 10:56:34 AM
Excellent post Vandit!  :+ cred:
Title: Re: FG Knot
Post by: Trevour on March 21, 2016, 11:28:19 AM
Nice post Vandit. With regards to the video, I would suspect those beads are performing much like mono would, whereas braid would go straight over the rim with little or no 'loop' above it. I've always suspected the difference in suppleness between the line types being the main problem, which is why even an fg is not foolproof. Does anyone using braid as mainline on a multiplier with a fluoro/mono leader have any feedback. Can bigger knots be used? This should give us an indication as to what extent the coils on a grinder are responsible for the problems.
Title: Re: FG Knot
Post by: Vandit on March 21, 2016, 11:52:32 AM
The momentum direction changes on a spinning reel will be vastly more complicated than this.  The take home message really is that an abrupt change in mass will change how momentum is conserved.  To visualise this consider how the chain almost makes a standing wave or 'loop' under steady state, now consider how this loop swings when the end of the chain is reached (no more mass behind to stabilise it).  This is perfectly analogous to a braid mono connection.  It is this swinging end that creates wraps and the associated havoc.
Title: Re: FG Knot
Post by: Alf03 on March 21, 2016, 12:06:16 PM
Nice post Vandit. With regards to the video, I would suspect those beads are performing much like mono would, whereas braid would go straight over the rim with little or no 'loop' above it. I've always suspected the difference in suppleness between the line types being the main problem, which is why even an fg is not foolproof. Does anyone using braid as mainline on a multiplier with a fluoro/mono leader have any feedback. Can bigger knots be used? This should give us an indication as to what extent the coils on a grinder are responsible for the problems.

I do not recommend using braid as a main line on a multiplier. Especially if you enjoy having a thumb!  I am not aware of anyone fishing with a braid mainline on a multiplier due to this. You can just imagine getting a finger in a birds nest while casting. The cuts are bad enough with nylon!
Title: Re: FG Knot
Post by: Trevour on March 21, 2016, 01:04:39 PM
Hi again Vandit, I found this video https://youtu.be/YZ1-4DVLSZ0, as an explanation for the wave effect with the beads. It suggests that a change in flexibility rather than mass is the reason for the problem, in other words the properties of the material rather than its mass is the problem. To visualize - if you double braid and lay the two lines next to each other and leave them alone, they will remain next to each other, and the loop formed will be small, where with mono the two lines would separate leaving a larger loop. This being a result of the lines ability or lack thereof to change direction. In other words a chain followed by piano wire may maintain the wave, even though the wire has less mass than a rope.
Title: Re: FG Knot
Post by: Vandit on March 21, 2016, 03:24:34 PM

Hi again Vandit, I found this video https://youtu.be/YZ1-4DVLSZ0 (https://youtu.be/YZ1-4DVLSZ0), as an explanation for the wave effect with the beads. It suggests that a change in flexibility rather than mass is the reason for the problem, in other words the properties of the material rather than its mass is the problem. To visualize - if you double braid and lay the two lines next to each other and leave them alone, they will remain next to each other, and the loop formed will be small, where with mono the two lines would separate leaving a larger loop. This being a result of the lines ability or lack thereof to change direction. In other words a chain followed by piano wire may maintain the wave, even though the wire has less mass than a rope.

Hi Trevour,
Agreed, dynamics is a two sided coin in that mass as well as stiffness will govern the mode shapes (the shape of the "standing waves").  That is, the piano wire argument would be a meritorious solution.  My argument lies in the fact the mode shapes exist due to acceleration which can only act on mass, or rather inertial forces.
Title: Re: FG Knot
Post by: Zak-e-Boy on March 22, 2016, 03:47:34 PM
Eish, men..interesting subject.  No offence, but I think some of you guys need to get down to a lower altitude where the salt water is. It appears that the high altitude, fresh water and the lack of fishing is doing something strange to you guys up there ?  w;k   
Title: Re: FG Knot
Post by: Trevour on March 22, 2016, 05:07:02 PM
Eish, men..interesting subject.  No offence, but I think some of you guys need to get down to a lower altitude where the salt water is. It appears that  :sailf:the high altitude, fresh water and the lack of fishing is doing something strange to you guys up there ?  w;k

This is how gauteng does saltwater fishing in the off season! On the bright side Ill get my fix starting tomorrow with a ten day trip to Mpame Transkei.

Vandit! Once solution 1 and 2 are in place, solution 3 is an issue. The  expense (not such a big problem), but for eg with 30 lbs line, the leader would be at least .50 after the taper to ensure it breaks beyond 30lbs with some change, I think our mass and stiffness priblem will still exist. I was thinking taking care of the problem on the braid side of the join, by inserting a length of mono. It would need to be at least the length as the distance from first guide to the reel, and would need to twist (fairly big twists) around the braid. It would also if possible not take pressure when pulling hard (ie not act a a double line as in biminis etc, but merely take care of the huge and sudden loss of mass and stiffness.
Title: Re: FG Knot
Post by: Zak-e-Boy on March 22, 2016, 05:32:49 PM
Trevour, enjoy your trip and tight lines !!
Title: Re: FG Knot
Post by: colin on March 22, 2016, 05:33:08 PM
[quote author=Zak-e-Boy
Eish, men..interesting subject.  No offence, but I think some of you guys need to get down to a lower altitude where the salt water is. It appears that the high altitude, fresh water and the lack of fishing is doing something strange to you guys up there ?  w;k
 :corrct: :corrct:

 :lolo:  :dunno: :dunno: :dunno: lotsa big words for a old timer smous. :hehe: :toppie:
Title: Re: FG Knot
Post by: REEFMAN on March 22, 2016, 05:39:18 PM
On the bright side Ill get my fix starting tomorrow with a ten day trip to Mpame Transkei.


Bastid...! Your punishment for tormenting us is a full report please!!
Awesome place.
 :tite
Title: Re: FG Knot
Post by: Vandit on March 22, 2016, 11:01:09 PM
Vandit! Once solution 1 and 2 are in place, solution 3 is an issue. The  expense (not such a big problem), but for eg with 30 lbs line, the leader would be at least .50 after the taper to ensure it breaks beyond 30lbs with some change, I think our mass and stiffness priblem will still exist. I was thinking taking care of the problem on the braid side of the join, by inserting a length of mono. It would need to be at least the length as the distance from first guide to the reel, and would need to twist (fairly big twists) around the braid. It would also if possible not take pressure when pulling hard (ie not act a a double line as in biminis etc, but merely take care of the huge and sudden loss of mass and stiffness.


Imagine being on the beach and having to explain to other fishos what the hell you are doing tying that... And then trying to to explain the mass - stiffness dilemma... I would love to see that sight with a beer in hand.


I reckon the ultimate implementation would be using hollow braid.  FG to leader and splice a few inches behind the knot into the braid. Get a 9ft tapered fly fishing leader (appropriately sized) and splice it into the braid behind this.  This would ensure a gradual transition of both mass and stiffness with such a long taper to such a thin end.  And the splicing shouldn't interfere with the line strength.


Would I go this far though?  To test the hypothesis perhaps once at a damn somewhere (social maybe).  I doubt I'd rock up somewhere to actually fish with it though.
Title: Re: FG Knot
Post by: Lofty on November 09, 2016, 05:47:44 PM
I tried the FG for the first time today,as I'm going to do some work in Mosselbay and rods are going with obviously...so on my spinning setups I needed/wanted to try this knot from braid mainline-braid leader and from braid leader to +- 70cm fluoro leader...doing it at first with the braid leader was quite a faf,battling to bite the mainline tag,plus the braid leader is limp... :cnfzd so after a few failed attempts I got a little :unhap and noticed my half empty plastic water bottle... :-) so unscrewed the cap,wound the tag around the top and screwed on the cap 'till there was enough tension so that the braid don't slip,then hung the bottle off the edge of the counter...worked a charm... :happ: I thought afterwards that a vicegrip could do the same thing if it could grip the braid...


p.s.:Both FG's look good,and are strong,the fluoro one is actually a little see-through :clwn
Title: Re: FG Knot
Post by: Ziggy on November 09, 2016, 07:52:42 PM
I tried the FG for the first time today,as I'm going to do some work in Mosselbay and rods are going with obviously...so on my spinning setups I needed/wanted to try this knot from braid mainline-braid leader and from braid leader to +- 70cm fluoro leader...doing it at first with the braid leader was quite a faf,battling to bite the mainline tag,plus the braid leader is limp... :cnfzd so after a few failed attempts I got a little :unhap and noticed my half empty plastic water bottle... :-) so unscrewed the cap,wound the tag around the top and screwed on the cap 'till there was enough tension so that the braid don't slip,then hung the bottle off the edge of the counter...worked a charm... :happ: I thought afterwards that a vicegrip could do the same thing if it could grip the braid...


p.s.:Both FG's look good,and are strong,the fluoro one is actually a little see-through :clwn

another way to do it     http://www.ultimateangling.co.za/index.php?topic=21615.msg367691#msg367691 (http://www.ultimateangling.co.za/index.php?topic=21615.msg367691#msg367691)
Title: Re: FG Knot
Post by: Bwana on November 12, 2016, 09:37:54 AM
Great idea there Ziggy  :rck"


Guys I agree with Gerhard's comment earlier in the thread - I'll go with an FG on my casting / spinning outfits up to 50lb braid but for jigging and heavier braid I still stick with the PR knot.


One thing I'll advise is to consider switching from the half-hitch style of finishing on the FG and rather go to the Rizutto finish as shown in this clip - it's easier to finish the knot and mechanically stronger. I've been using the Rizutto finish for a while know on both my PR knots and FG's and it's been great, just my 2c to consider:


https://www.youtube.com/watch?v=H5PFJefx3J0 (https://www.youtube.com/watch?v=H5PFJefx3J0)


Neater finish, faster to tie than all the half hitches and has not failed me yet!



Title: Re: FG Knot
Post by: Vandit on November 12, 2016, 09:54:52 AM
Great idea there Ziggy  :rck"


Guys I agree with Gerhard's comment earlier in the thread - I'll go with an FG on my casting / spinning outfits up to 50lb braid but for jigging and heavier braid I still stick with the PR knot.


One thing I'll advise is to consider switching from the half-hitch style of finishing on the FG and rather go to the Rizutto finish as shown in this clip - it's easier to finish the knot and mechanically stronger. I've been using the Rizutto finish for a while know on both my PR knots and FG's and it's been great, just my 2c to consider:


https://www.youtube.com/watch?v=H5PFJefx3J0 (https://www.youtube.com/watch?v=H5PFJefx3J0)


Neater finish, faster to tie than all the half hitches and has not failed me yet!


Agree with all of this.  With the Rizutto being a forward finished knot (tension applied towards leader) it is not self-tightening.  Keep that in mind if you intend to cast it through guides on long leaders.  I always have two alternating locking half hitches before finishing.  For PR or FG knots going through guides, I moved back to the finishing off with alternating half hitches.
Title: Re: FG Knot
Post by: FishStyx on November 12, 2016, 11:23:10 AM
Tried the Rizutto finish a few times and it's always unraveled... After a while there is a 10mm tag end blowing round in the wind. And that's without ever casting the knot through the guides. I normally just finish as usual with back to back half hitches but I have considered getting some Knot Sense and trying that.
Title: Re: FG Knot
Post by: Bwana on November 12, 2016, 11:44:36 AM
The UV Knot Sense is a great product. I usually finish all my knots with that or just 2 coats of clear nail varnish for extra protection
Title: Re: FG Knot
Post by: Plugger on November 12, 2016, 12:51:38 PM
What does FG stand for ? "Fairly good" ?
Title: Re: FG Knot
Post by: FishStyx on November 12, 2016, 03:07:58 PM
The UV Knot Sense is a great product. I usually finish all my knots with that or just 2 coats of clear nail varnish for extra protection


Cool... I think I'll get some. I'd be a tad nervous of nail varnish without researching what the solvent (carrier) is and it's possible effect on lines. Nail varnish remover is usually acetone with some things to lower it's volatility and make it smell nice for girls... and acetone is quite harsh stuff when it comes to many plastics. Maybe you've checked it out already Bwana?


Other issue here would be to only use "glue" on the termination of the knot (rizutto or half hitches) and not on the finger cuff section of the knot. That has to be able to move in order to bite down on the mono. With Knot Sense, I thik I may be more inclined to end with the Rizutto wrap.
Title: Re: FG Knot
Post by: REEFMAN on November 13, 2016, 02:56:30 PM
What does FG stand for ? "Fairly good" ?
FG stands for Fine Grip. Fine grip knot.
Title: Re: FG Knot
Post by: Plugger on November 15, 2016, 07:41:02 AM
Thanks Reefs, I was reading an article about variations to knots and guys were asking if they submitted their variation "would the knot be named after them ".
SimplePortal 2.3.7 © 2008-2026, SimplePortal