ULTIMATE ANGLING - the Ultimate SA Fishing website
General Angling Topics => DIY Forum => Topic started by: No-Pro on September 02, 2014, 08:40:31 AM
-
Hi guys,
I am thinking of building my own roof rack.
Can anyone please advise where i can get galvanizing dip done, in Cape Town, preferably in the Southern Suburbs or Southern Peninsula?
Help would be much appreciated.
Thanks.
-
Theres a few on Epping side , Don't know the names . There should be places in Ottery .
Then theres on close to PArmalat in PArow industry.
Pretty useless info LOL
-
Thanks Lenny, it didn't help much, but at least you replied.
Anybody know of a place or 2??
-
Galvatech (Pty) Ltd.
P.O. Box 2827,
Bellville,
7535,
Cape Town
Physical Address: 53A Sacks Circle,
Bellville,
7530
Tel: +27 (21) 951-1211
Fax: +27 (21) 951-3400
Pro-Galv
Corner of Cilmor & Cecil Morgan Streets
Sunnyside
Stikland
7530
Tel: 021 945 1803
Fax: 021 945 1873
Cape Galvanising (Pty) Ltd
Phone: (021) 931 7224
Fax: (021) 931 9490
Address:
Juliana Street, Beaconvale Industria
Parow Valley
Cape Town
7500
South Africa
-
Thanks Sparky, much appreciated. :-)
-
While on the topic, has anybody any idea what it would presently cost to re-galvanise a medium sized boat's trailer. Does it have to be sand blasted first to get the original coat off and does extra/additional galvanising take on the old galvanising. I presume any rust will have to be sand blasted.
Imagine its a costly affair.
-
around 10-00 a kg
-
this may help
Hot Dip Galvanized Steel - What, How & Where (http://www.youtube.com/watch?v=c2J07n5hSbs#)
https://www.youtube.com/watch?v=c2J07n5hSbs (https://www.youtube.com/watch?v=c2J07n5hSbs)
-
While on the topic, has anybody any idea what it would presently cost to re-galvanise a medium sized boat's trailer. Does it have to be sand blasted first to get the original coat off and does extra/additional galvanising take on the old galvanising. I presume any rust will have to be sand blasted.
Imagine its a costly affair.
We encountered this problem with an old trailer that we wanted to be galvanised, it had been made from a mixture of galvanised and un galvanised material, to get rid of the old galvanising would have meant pickling the trailer in an acid bath sand blasting and then galvanising, this wasn't going to be a quick job so we elected to sandblast and spray with hamerite
-
@Dodger, I heard of Hamerite been sprayed directly on steel and no rusting.
If i build a steel roofrack and spray with hamerite, do i need to galvanize or would the hamerite do the job of rustproofing it?
I assume hamerite dont come in spray cans? My damn compressor broke recently. If i have to fix the compressor and build the rack, it would probably cost the same as buying a rack from the shops.
-
@Dodger, I heard of Hamerite been sprayed directly on steel and no rusting.
If i build a steel roofrack and spray with hamerite, do i need to galvanize or would the hamerite do the job of rustproofing it?
I assume hamerite dont come in spray cans? My damn compressor broke recently. If i have to fix the compressor and build the rack, it would probably cost the same as buying a rack from the shops.
For a roof rack you can brush it on, I have painted my old venter trailer lid this way and it looks ok. Hamerite will act similar to galvanising for rust proofing, it is not as good as galvanising, but it does work and any scratches / damage you can touch up. I think it is a very good affordable product.
-
@Dodger, I heard of Hamerite been sprayed directly on steel and no rusting.
If i build a steel roofrack and spray with hamerite, do i need to galvanize or would the hamerite do the job of rustproofing it?
I assume hamerite dont come in spray cans? My damn compressor broke recently. If i have to fix the compressor and build the rack, it would probably cost the same as buying a rack from the shops.
For a roof rack you can brush it on, I have painted my old venter trailer lid this way and it looks ok. Hamerite will act similar to galvanising for rust proofing, it is not as good as galvanising, but it does work and any scratches / damage you can touch up. I think it is a very good affordable product.
Do you need to apply any kind of undercoat, like NS4 for example, or can you apply it onto raw steel?
Can one go over it with a spray can of clear lacquer to seal it better and give a nicer finish?
-
Hammerite make a product called "Direct to Rust". No need for Primer or undercoat. Used this on my Trailer rooftop bars recently. Hand painted.
I removed all the old paint and rust first with wire brushes/flapper disks, then painted it on in 2 or 3 coats. Forms quite a thick, hard coat... time will tell to see how it weathers...
-
Hammerite make a product called "Direct to Rust". No need for Primer or undercoat. Used this on my Trailer rooftop bars recently. Hand painted.
I removed all the old paint and rust first with wire brushes/flapper disks, then painted it on in 2 or 3 coats. Forms quite a thick, hard coat... time will tell to see how it weathers...
:corrct:
-
And can one go over it with clear lacquer to get a better seal and nicer finish?
-
And can one go over it with clear lacquer to get a better seal and nicer finish?
you can if you want to, but Hamerite looks ok as it is
-
You get all sorts of paint in a can these days. If I were you I would give it two coats of primer and then two coats of your preferred colour. The thing with spray is there should not be any rust on the metal befor you spray it and you have to make sure you cover all services. If the water can not get to the metal, the metal can not rust. Did my roof rack with two coats of primer and two thick coats of 2k. Will fit it the weekend.
-
Thanks guys for the help and advice, much appreciated. :-)
-
This is most probably not my best effort but for the time I had it have to do for now. Sprayed with 2k medium silver.
-
Nice Pieta
My vehicle has factory fitted rails, so need to make 2x cross bars to fit onto that. Going to buy 2 of those Stainless steel lockable rod racks and fit it onto the cross members, which i am going to make.
Thanks everyone for advice and input :-)
-
With the factory fitted rails your job is alot easier. Are you going to put it on permanently?
-
Yes Pieta, i was thinking of leaving it on. I dont really like a roof rack, but to put the rod pieces together, thread the line through the eyes and tie the trace on next to the road, is a bit of a pain. With a lockable rod rack, i can get it all ready in the evening and just drive off in the night, bait and gooi, way easier.
-
It will be lots easier. Just don't tie the sinker. Some guys wind the sinker around the reel handle. They don't always stay there and can cause lots of damage to your car.
-
Thanks Pieta, valid point, I can imagine the damage a 6oz can do, swinging around and banging your roof.